Let's take a break during navigation while Autopilot follows the route, control it with remote control!

This System design a mobile rescue robotic Vehicle system based on Arduino to help the people on time which are trapped in natural calamity

A simple interface for a homemade (or commercial) antenna rotator. Manual command or USB via computer tracking software - EasyComm protocol

Control the speed of your PWM fan easily. No need for other circuits.

This post shows how to control stepper motor speed and direction of rotation using Arduino UNO board and PS2 joystick.

This is a smart wheelchair

In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.

Full procedure with theory explaining the concept behind a line follower robot

This project is a practical robotic arm that is stable, consistent and easy to use without motor shield or sensor shield. It has a low cost

Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...

This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.

Robot arm and its controller.

Make a solar tracker using an Arduino and a 3D printer.

Object following robot

How To Make a Stepper Motor Speed Controller using Arduino and L298 Motor Driver

Learn how to build a simple battle bot that can be controlled with a PS2 controller via Bluetooth.

Tired of controlling your robot with a joystick? Ever thought of controlling it with your hands?

CNC machine control with GRBL breakout board for Arduino Uno.

A device that shows where stars are by pointing with lasers.

Custom button powered via Arduino controls aftermarket exhaust flaps!

This car is designed to be controlled by voice commands.

A robotic arm that can be wirelessly controlled with a glove that contains IMU and flex sensors.

A robotic arm made from easily available materials that can record and replay positions.

Created with an Arduino, CNC shield, and 3 CD drives (X, Y, and Z). The frame is made out of two dowel rods and a laminate shelf.