An autonomous high speed line follower robot based on PID control.

Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.

A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.

A robotic arm that can be wirelessly controlled with a glove that contains IMU and flex sensors.

A laser-cut robot kitten that runs and learns from you.

Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.

This is AI-based Robot which learns on its own to avoid obstacles through experience:)

This Robot can walk exercise and dance! how awesome!! :)

A hand gesture-controlled car made from scrap DVD player. Hand gestures detected by gyro and Arduino-driven motor.

The FlySky joystick is adopted to control the speed and limitations of the ramp of two stepper motors

A two-wheeled, Arduino-based robot that rolls around.

Line followers follow lines, right? But what if you put some LEDs on top and use long exposure? Well, you get this!

This interesting project will cover all things required for the ultimate goal of building a mobile remote surveillance camera.

Autonomous EV3 Color Tower Explorer is a Lego robot that scan a field searching color towers and go to each based in Alexa directives.

A walking four legged robot "mammal style." 3DOF legs, IR receiver all connected to a Pro Mini. Material cost less than $100.

Make your own motor driver shield PCB for an Arduino Pro Mini using an Arduino Pro Mini.

A simple and cheap three wheeled time waster for almost any skill level. Basic stats are Arduino Mini Pro, Sonic distance, and a Gyro.

I hacked the Breville One-Touch Tea Maker to play music from Star Wars. It plays when the tea basket moves down and when it moves back up.

AVR ATmega32A MCU based, DC Motors speed/position/timing controller/testing board for Stepper, Servo, Gear motors and programmable too.

Use three stepper motors to make the classic analog clock movement in the opposite direction.

Line following robot with RFID sensor for supplying materials and automating workflow - cheap and open source. Inspired by industrial robots

Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.

A 3D printed, battery powered box that includes an Arduino, an OLED display and a rotary encoder is used to control a motorized turntable.

Device that manages the USB camera microscope: Make easy focus with DVD stepper motor and light the object with different colors and intens.