Let's take a break during navigation while Autopilot follows the route, control it with remote control!
Project tutorial by marcozonca
A robotic hand which mimics the gesture made by our hand.
Project tutorial by Rushabh Jain
Baby MIT Cheetah Robot is the previous version of this robot. I did lot of changes in this version.
Project tutorial by jegatheesan
Control a servo motor hand with the power of a glove and DIY flex sensors!
Project showcase by Laurence Lai
Jrobot Delivery is ready to deliver your next pizza!
Project showcase by joechen
This project will show you how to upgrade your regular shopping cart to an RC shopping cart.
Project tutorial by STEMpedia
A small car based on Arduino platform which can be controlled using Bluetooth and a Android app.
Project tutorial by Aniket Mindhe
With the help of hand gesture corresponding to the Accelerometer sensor the wheel chair will move
Project tutorial by afsh_ad
Make a solar tracker using an Arduino and a 3D printer.
Project tutorial by Ingeimaks Ingeimaks
The car is moving by two dc motors and turn by setting one motor over bluetooth using Android App on Andriod phone.
Project showcase by S.Ranjith Reddy
Object following robot
Project tutorial by mohammadsohail0008
This project is all about "How to build a arduino robot". this arduino robot called Otto robot.
Build your own line following robot (line follower) step by step easily by following this tutorial
Project tutorial by lightthedreams
A spider-like robot based on Arduino.
Project tutorial by Renga
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
The LittleArm 2C is a 3D printed, Bluetooth-controlled, Arduino robot arm designed for STEM
Project tutorial by Slant Concepts
When I concentrate, the truck’s wheels spin. One strong eye-blink does a left turn. A strong double-blink does a right turn.
Project tutorial by Tony
A simple interface for a homemade (or commercial) antenna rotator. Manual command or USB via computer tracking software - EasyComm protocol
Project tutorial by viorelracoviteanu
Here is a step by step guide to making a "crawler robot."
Project tutorial by DIY GUY Chris
Cool robot that follows black line. Learn and make a line follower robot with PID controller in 2 hours.
Project tutorial by KittenBot
This is a smart wheelchair
Project tutorial by MakerBuddy
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
The making of a large 3D printer (400x400x400 mm) for a college project.
Project tutorial by Desi Engineer
Teaches you how to use the Stepper motor and driver in the Arduino Grove Starter Kit.
Or connect with your social account:
New here? Create an account