Want to display text? Here is your component!

Writing in a 4 digit 7 segment LED display.

In this article, you will learn how to run OLEDs by Arduino, and display text, images, and animations on them.

A simple Arduino clock without RTC module for beginners.

Alarm Clock with Arduino.

The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.

A realtime battery indicator for your project without extra components or using any analog I/Os.

This project will show you how to make with Arduino and 16X2 LCD real time display from your computer.

In this sample, we will connect an RGB LED strip to an Arduino and control it to indicate the weather forecast behind a picture.

Complete Digital Clock including many features: Alarm, Temperature, Humidy, Dew Point, RTC and PIR (Presence Infrared Sensor).

Digital clock with Arduino using Shift Register (74HC595), real time clock, temperature and humidity sensor and 7 Segments display.

A step by step tutorial for visualising the motion of an MPU6050 motion sensor in the form of artificial flight instruments.

Here, you will learn how to use TFT LCDs by Arduino. From basic commands to professional designs and technics are all explained here.

Build your Nixie Tubes display easy.

Visualize the DCF77 radio signals with this clock.

This project is about an Arduino running a digital clock, a stopwatch, and a timer simultaneously!

A guide on how to use the OSEPP LCD and keypad shield.

Monitor Oil Temp and Pressure, Water Temp, Voltage, Fuel level. Display on Nextion display or Nokia LCD

A very easy Genuino UNO project with LCD and DHT11 temp. and humidity sensor. The LCD shows the temp., humidity and other infos.

In 1884 Nipkow invented a method to capture and view a moving image. This project uses the same disk to generate a moving digital image.

This digital clock speaks the time in two languages (English or Portuguese).

48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.

Hello! I'm going to show you how to make an Arduino OLED thermometer and hygrometer* with DHT11.

Digital and binary Clock using Arduino, RTC, two LED matrix, operating in 4 different modes (AM-PM / 24 HS / 02 types of fonts).