In this sample, we will connect an RGB LED strip to an Arduino and control it to indicate the weather forecast behind a picture.

Build your Nixie Tubes display easy.

This project will show you how to make with Arduino and 16X2 LCD real time display from your computer.

A step by step tutorial for visualising the motion of an MPU6050 motion sensor in the form of artificial flight instruments.

Visualize the DCF77 radio signals with this clock. It also tell you the time.

A guide on how to use the OSEPP LCD and keypad shield.

Today I am going to show you how to make An OpenSource Arduino UNO OLED Clock that also measures temperature.

The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.

Dear friends welcome to another tutorial! In this video we are going learn how to build ourown menu for the popular Nokia 5110 LCD displa...

Simple wall clock using Adafruit 1/4 60 Ring Neopixel

48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.

A simple, yet effective, temperature telling device that updates every 5 minutes giving you the temperature of your room!

In this tutorial you will learn how to visualize the motion of IMU (Inertial Measurement Unit) sensor, "MPU-6050 [6DOF]" in 3D.

In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.

A 16x32 LED matrix displaying an evolving RGB countdown 'til the new year. A surefire way to bring a New Year's Eve party to the next level!

Arduino Uno and Visuino: GPS Location display with GPS and TFT Touchscreen Display Shields - Quick and Easy!

eDOT is an Arduino based precision clock and weather station with built in IR remote receiver and automatic brightness adjustment.

This tutorial shows how to control an array of 8x8 LED matrices using an Arduino Uno, to create the face of a robot.

In this sample, we will connect an RGB LED strip to an Arduino and hand draw the lights through a Windows 10 phone over Bluetooth.

Another type of clock, which needs a bit of thinking, before you can read it...

Interfacing the shield with Arduino UNO board and fixing the touch detection and inversion problem.

An alarm clock using a DS1302 RTC and a buzzer. You can set the RTC by a keypad as well as set the alarm.

Display the results from the HC-SR04 ultrasonic sensor on an LCD display using 433MHz transmitter and receiver.

This small PCB lets you learn Morse code and communicate with friends. Set up a telegraph network in your very own home!