I've created a simple menu with an LCD that controls what an LED does. The menu is easy to edit and adapt for various projects.

A realtime battery indicator for your project without extra components or using any analog I/Os.

48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.

A step by step tutorial for visualising the motion of an MPU6050 motion sensor in the form of artificial flight instruments.

In this tutorial you will learn how to visualize the motion of IMU (Inertial Measurement Unit) sensor, "MPU-6050 [6DOF]" in 3D.

Monitor Oil Temp and Pressure, Water Temp, Voltage, Fuel level. Display on Nextion display or Nokia LCD

Interfacing a 2.8 inch SPI TFT that has a ILI9341 chip to an Arduino Uno.

Dot Matrix Display is a matrix of LED connected in 16x32 pattern. We can wirelessly transfer messages over mobile to DMD using Bluetooth.

Build your Nixie Tubes display easy.

Make your pixel art look delightfully retro using an OLED display. We'll see how to make your own image, and animate it.

This alarm clock and timer work without the help of a computer. All the settings can be done on the clock itself and stored in the EEPROM.

An alarm clock that uses an Arduino UNO, a buzzer, DS1307 rtc, and usb port.

Dear friends welcome to another tutorial! In this video we are going learn how to build ourown menu for the popular Nokia 5110 LCD displa...

Create Dot Art Icons for Arduino projects

Build your own Nixie tube clock/thermometer/display with ease.

In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.

While debouncing needs improvement, it's a good start to understand interrupts!

eDOT is an Arduino based precision clock and weather station with built in IR remote receiver and automatic brightness adjustment.

This digital clock speaks the time in two languages (English or Portuguese).

Making Nixie clock with Arduino UNO and opto-isolation chip only.

In 1884 Nipkow invented a method to capture and view a moving image. This project uses the same disk to generate a moving digital image.

Arduino driver for 8x8 LED Modules controlled via MAX722xx.

This project describes how to build a GPS data logger at a lower cost.

Pick the time from a DCF77 radio signal and show it on an OLED display.