A 20x4 RGB LCD clock that can display over 500 poems using Arduino and an SD card reader.

A step by step tutorial for visualising the motion of an MPU6050 motion sensor in the form of artificial flight instruments.

48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.

How to build an accurate digital compass using a 3.5 inch Nextion LCD and a QMC5883L compass module for the Arduino Uno.

Making Nixie clock with Arduino UNO and opto-isolation chip only.

RGB LEDs triangular/hexagonal pixels matrix.

An LCD1602 alarm clock that includes many of the other LCD1602 clocks found on maker sites.

Dear friends welcome to another tutorial! In this video we are going learn how to build ourown menu for the popular Nokia 5110 LCD displa...

Build your Nixie Tubes display easy.

In this tutorial you will learn how to visualize the motion of IMU (Inertial Measurement Unit) sensor, "MPU-6050 [6DOF]" in 3D.

In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.

This project describes how to build a GPS data logger at a lower cost.

eDOT is an Arduino based precision clock and weather station with built in IR remote receiver and automatic brightness adjustment.

Build your own Nixie tube clock/thermometer/display with ease.

Another type of clock, which needs a bit of thinking, before you can read it...

This is a simple clock that tells time in words.

Distraction... Begone!!

This project connects the ADLX345 3-Axis accelerometer to display a location on an 8x8 LED matrix using the MAX7219 LED driver chip.

Today I am going to show you how to make An OpenSource Arduino UNO OLED Clock that also measures temperature.

Using SD Card and 16x2 LCD module.

With just a few minutes make a simple oscilloscope good for measuring frequency, testing capacitors and much more.

This project is about an arduino controlling the smartGPU2 intelligent graphics processor and creates an smart phone like interface.

This project will show how to display NIXIE tube by Arduino and Optocoupler chip only

Make your pixel art look delightfully retro using an OLED display. We'll see how to make your own image, and animate it.