This shield alleviates the garbled bird nest of wires that manifests from connecting to the Arduino Uno via jumpers!
Project showcase by Brad_83
A mechanism that determines the speed at which your bike is traveling at.
Project tutorial by Alex Cockman
An LCD1602 alarm clock that includes many of the other LCD1602 clocks found on maker sites.
Project tutorial by John Bradnam
Build your own Nixie tube clock/thermometer/display with ease.
Project tutorial by Grisha Anofriev
A step by step tutorial for visualising the motion of an MPU6050 motion sensor in the form of artificial flight instruments.
Project tutorial by Aritro Mukherjee
This is a board to control two Nokia screens to give my robot eyes. It will be connected to the microcontroller via I2C (two Wire).
Project in progress by Tim Jackson
While debouncing needs improvement, it's a good start to understand interrupts!
Project showcase by John Boxall and CesareBrizio
This is an uncommon digital clock that can run in three different modes: mode digital and two different modes of binary clock.
Project showcase by LAGSILVA
A 20x4 RGB LCD clock that can display over 500 poems using Arduino and an SD card reader.
Project tutorial by kzra
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
Project tutorial by Prasanth K S
Tutorial on how to use the ADC Module of the ATmega328P
by Yeshvanth Muniraj
A simple menu configuration on an LCD display using six buttons.
Project showcase by danhostler1985
How to build an accurate digital compass using a 3.5 inch Nextion LCD and a QMC5883L compass module for the Arduino Uno.
Project tutorial by mariogianota
This digital clock speaks the time in two languages (English or Portuguese).
This project describes how to build a GPS data logger at a lower cost.
Project tutorial by yvesmorele
Making Nixie clock with Arduino UNO and opto-isolation chip only.
Project tutorial by engineer2you
I've created a simple menu with an LCD that controls what an LED does. The menu is easy to edit and adapt for various projects.
by Ian Cumming
Arduino version of the early mechanical television, invented by Nipkow more than 100 years ago.
Project showcase by christopheArduino
In this project we connect RTC module to arduino. Read time of it and display it on OLED display. The clock has analog look and feel
Project tutorial by mdraber
A realtime battery indicator for your project without extra components or using any analog I/Os.
Project showcase by Arduino World
A simple stopwatch that can store up to 4 split times.
Build your Nixie Tubes display easy.
Project tutorial by Team GRA_AND_AFCH
Stopwatch with start/pause/lap/reset functions built with Arduino uno, LCD and two switches.
Project showcase by mingmike
Very simple clock, that looks great!
Project showcase by Sahaj Sarup
Or connect with your social account:
New here? Create an account