How to build a digital Hourglass using Arduino.
Project tutorial by edison science corner
A 20x4 RGB LCD clock that can display over 500 poems using Arduino and an SD card reader.
Project tutorial by kzra
A simple stopwatch that can store up to 4 split times.
Ever wanted to display any hand-drawn image on your fancy oscilloscope? Well, now you can!
Project tutorial by Juan Alvarez and Timster
By using this color TFT LCD shield, we can show characters, strings, button interfacing, bitmap images, etc. on the color TFT LCD.
Project tutorial by Rahul Khanna D
A step by step tutorial for visualising the motion of an MPU6050 motion sensor in the form of artificial flight instruments.
Project tutorial by Aritro Mukherjee
An LCD1602 alarm clock that includes many of the other LCD1602 clocks found on maker sites.
Project tutorial by John Bradnam
Dot Matrix Display is a matrix of LED connected in 16x32 pattern. We can wirelessly transfer messages over mobile to DMD using Bluetooth.
by ASHRU ABHIJIT PATTNAIK
This project tries to build an AI platform with Arduino.
Project in progress by Robert's Robot
This is a board to control two Nokia screens to give my robot eyes. It will be connected to the microcontroller via I2C (two Wire).
Project in progress by Tim Jackson
A clock that shows the time on 3 panel mount voltmeters.
Project tutorial by markbennettuk
This project describes how to build a GPS data logger at a lower cost.
Project tutorial by yvesmorele
In this project we connect RTC module to arduino. Read time of it and display it on OLED display. The clock has analog look and feel
Project tutorial by mdraber
Monitor Oil Temp and Pressure, Water Temp, Voltage, Fuel level.
Display on Nextion display or Nokia LCD
Project showcase by petemnz
Build your own Nixie tube clock/thermometer/display with ease.
Project tutorial by Grisha Anofriev
Use your Arduino and build Nixie clock, thermometer and hygrometer. Beautifully made housing and easy to operate.
Project tutorial by Marcin Saj
A mechanism that determines the speed at which your bike is traveling at.
Project tutorial by Alex Cockman
I've created a simple menu with an LCD that controls what an LED does. The menu is easy to edit and adapt for various projects.
by Ian Cumming
This shield alleviates the garbled bird nest of wires that manifests from connecting to the Arduino Uno via jumpers!
Project showcase by Brad_83
While debouncing needs improvement, it's a good start to understand interrupts!
Project showcase by John Boxall and CesareBrizio
This is an uncommon digital clock that can run in three different modes: mode digital and two different modes of binary clock.
Project showcase by LAGSILVA
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
Project tutorial by Prasanth K S
Tutorial on how to use the ADC Module of the ATmega328P
by Yeshvanth Muniraj
A simple menu configuration on an LCD display using six buttons.
Project showcase by danhostler1985
Or connect with your social account:
New here? Create an account