Writing in a 4 digit 7 segment LED display.

A simple Arduino clock without RTC module for beginners.

Alarm Clock with Arduino.

I've created a simple menu with an LCD that controls what an LED does. The menu is easy to edit and adapt for various projects.

Here, you will learn how to use TFT LCDs by Arduino. From basic commands to professional designs and technics are all explained here.

Basic code to make Arduino communicate with ILI9341.

Want to display text? Here is your component!

The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.

Using two Seven-Segment Displays (SSD) simultaneously on an Arduino Uno Board to display numbers from 00 to 99, without charlieplexing.

A realtime battery indicator for your project without extra components or using any analog I/Os.

In this tutorial, you will learn how to use and set up 2.4″ Touch LCD Shield for Arduino. Basic setup to a paint app!

In this article, you will learn how to run OLEDs by Arduino, and display text, images, and animations on them.

48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.

A guide on how to use the OSEPP LCD and keypad shield.

You can communicate your Nextion LCD with your Arduino UNO by Software serial ... a liitle tricky but not much :)

A step by step tutorial for visualising the motion of an MPU6050 motion sensor in the form of artificial flight instruments.

A clock, controlled by a RTC module, that you can see on a 4-digit display.

In this tutorial you will learn how to visualize the motion of IMU (Inertial Measurement Unit) sensor, "MPU-6050 [6DOF]" in 3D.

This is how to make your own LCD timer, just with an Arduino, a LCD screen and some hook-up wires.

This project will show you how to make with Arduino and 16X2 LCD real time display from your computer.

Digital clock with Arduino using Shift Register (74HC595), real time clock, temperature and humidity sensor and 7 Segments display.

This tutorial shows how to control an array of 8x8 LED matrices using an Arduino Uno, to create the face of a robot.

Monitor Oil Temp and Pressure, Water Temp, Voltage, Fuel level. Display on Nextion display or Nokia LCD

An alarm clock using a DS1302 RTC and a buzzer. You can set the RTC by a keypad as well as set the alarm.