The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.

48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.

A guide on how to use the OSEPP LCD and keypad shield.

A step by step tutorial for visualising the motion of an MPU6050 motion sensor in the form of artificial flight instruments.

In this tutorial you will learn how to visualize the motion of IMU (Inertial Measurement Unit) sensor, "MPU-6050 [6DOF]" in 3D.

This project will show you how to make with Arduino and 16X2 LCD real time display from your computer.

This tutorial shows how to control an array of 8x8 LED matrices using an Arduino Uno, to create the face of a robot.

An alarm clock using a DS1302 RTC and a buzzer. You can set the RTC by a keypad as well as set the alarm.

In this sample, we will connect an RGB LED strip to an Arduino and control it to indicate the weather forecast behind a picture.

Build your Nixie Tubes display easy.

Visualize the DCF77 radio signals with this clock.

A simple, yet effective, temperature telling device that updates every 5 minutes giving you the temperature of your room!

A little tutorial to make a digital photo frame, and also use the touch functions to navigate between images.

In this project I'll show you a simple way to control a 7 Segment Display with a keypad!

Arduino Uno and Visuino: GPS Location display with GPS and TFT Touchscreen Display Shields - Quick and Easy!

Dear friends welcome to another tutorial! In this video we are going learn how to build ourown menu for the popular Nokia 5110 LCD displa...

Build your own Nixie tube clock/thermometer/display with ease.

Make your pixel art look delightfully retro using an OLED display. We'll see how to make your own image, and animate it.

Display the results from the HC-SR04 ultrasonic sensor on an LCD display using 433MHz transmitter and receiver.

In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.

eDOT is an Arduino based precision clock and weather station with built in IR remote receiver and automatic brightness adjustment.

Simple wall clock using Adafruit 1/4 60 Ring Neopixel

Arduino driver for 8x8 LED Modules controlled via MAX722xx.

Pick the time from a DCF77 radio signal and show it on an OLED display.