A realtime battery indicator for your project without extra components or using any analog I/Os.

An Arduino analog clock refreshed by GPS on TFT display - Steampunk GPS Clock.

Gixie Clock is a modern device that reproduces the retro beauty of Nixie tube displays.

A very easy Genuino UNO project with LCD and DHT11 temp. and humidity sensor. The LCD shows the temp., humidity and other infos.

This project is one of a series of projects that is aims to create tools that helps in so many ways.

Monitor Oil Temp and Pressure, Water Temp, Voltage, Fuel level. Display on Nextion display or Nokia LCD

This is how to make your own LCD timer, just with an Arduino, a LCD screen and some hook-up wires.

This alarm clock and timer work without the help of a computer. All the settings can be done on the clock itself and stored in the EEPROM.

A weather clock with Arduino, RTC, DHT22 and BMP180.

In 1884 Nipkow invented a method to capture and view a moving image. This project uses the same disk to generate a moving digital image.

Arduino version of the early mechanical television, invented by Nipkow more than 100 years ago.

Using a smart GPU2, a smart SHIELD and Arduino we created a simple touchscreen oscilloscope!

Temperature, humidity and barometric pressure showing a comparison to a previous point in time and graphing the trend.

How to make an easy and adaptable countdown.

A unique TFT shield expanding the capabilities of an Arduino Uno.

An Arduino planetarium on 2,8" TFT display for your gps location. no internet connection!!! All the planetdata pre-stored on the Arduino.

A simple but beautifully accurate PWM frequency meter.

This project encodes serial messages into Morse code, and displays the characters on an LCD screen at the same time.

A large 4-digit 7-segment counter with LiPo backup, in case USB power is cut.

This project explains how to use a dual Clock using DS3231 on 1.8" ST7735 Display

With photocells in both goals and a bright LED-display on the table, a USB powerbank provides action for at least 30 hours.

Custom digital clock using all available resources of a 16x2 LCD to make it look good.

Animated 3D maze on an Arduino. No 3D libraries were used.

Control the LCD contrast and background LED with analogWrite!