Tracks compass heading, altitude, temperature, pressure, humidity, time, travel distance and GPS location during a hike.
Project tutorial by Shahariar
Read temperature and humidity values in a remote location and store the data in an SD card.
Project tutorial by Arduino_Genuino
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Project tutorial by Team Oizom
LIDAR stands for Light Detection and Ranging. LIDAR is used for many applications including 3D scanning, mapping, laser guidance, etc.
Project tutorial by abhinav
A remote controlled vehicle with stereo cameras on a head-tracked pan-tilt unit and wireless 3D first person control via an Oculus Rift.
Project showcase by twhi2525
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy
Project tutorial by Technovation
A fall detection system based on Arduino, Windows 10 and Microsoft Azure
Project tutorial by Jiong Shi
Soil moisture sensor which gives you LCD display of percentage of moisture.
Project tutorial by Patel Darshil
With only an arduino board, two servos, and an hc-sr04, and some python, you can create a room scanner that is capable of showing depth!
Project showcase by Arduino “having11” Guy
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
Use an Arduino, two small servo motors with light sensing photo resistors to steer a solar panel towards the sun. UPDATED
Project tutorial by scott mangiacotti
An Android app-controlled, Arduino-based kit that receives and analyzes humidity and temperature data.
Project tutorial by Diana Khalipina
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
Arduino based 5" LCD touchscreen weather station with remote sensor unit.
Project showcase by antiElectron
This project is about control of temperature in values of 23 and 25 grades and control for hysteresis using DHT22 and Arduino 101.
Project tutorial by pandhoit
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
This is the first version of my Arduino Weather Station, a very simple project that will give you weather information.
Project tutorial by Gabriele Scordamaglia
This is a 360 radar using an ultrasonic sensor that saves data and encodes them onto an image.
Project tutorial by Alireza Karkon
A basic introduction to the low cost and accurate HC-SR04!
We connect a VL53L0X Laser time-of-flight sensor to an Arduino to measure the liquid level in a tank using ToF ranging.
Project tutorial by Team ProtoCentral
An easy setup for smart air purifier system. This system use Amazon IoT with MQTT protocol to get real-time data of air quality condition.
Project tutorial by Aaron Kow
This is a very precise scale for any weight up to 1.5 kg!
Project showcase by mPelectronic
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
We present you the radar we created in the MicroLab lab. This radar uses 2 ultrasonic sensors and 1 motor moving continuously 360 degrees.
Project showcase by MicroLab Greece
Or connect with your social account:
New here? Create an account