Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
Read the soil moisture level (Dry-Perfect-Wet) and display results on a corresponding LED.
Humidity and temperature sensor DHT22 applied to automatic irrigation.
Project showcase by CristianColweb
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
by Dragos Iosub
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
In this tutorial, you’ll learn how to use the LSM303DLHC GY-511 compass module with Arduino to make a digital compass.
How to read HDC2010 temperature and humidity sensor data and comfort zone alerts Arduino using HDC2010 I2C breakout by itbrainpower.net.
Someone has been eating my cookies! Thankfully Arduino is here to help find out who it is.
Project tutorial by Dante Roumega
An Arduino-based altimeter, mostly for model rocketry.
Project in progress by M4K3R_4_M4R5
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
We aim to provide a low-cost precision agriculture solution powered by biophotovoltaics, and we start with developing a prototype.
Project in progress by eCO-SENSE
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
An Arduino Uno with DHT11 sensor module, three LEDs and a Piezo speaker.
Project tutorial by Tech with Matthew
Short and easy, read distance 2 - 400 cm and plot it in I2C OLED screen.
Project tutorial by javier muñoz sáez
A DHT11 connected to Blynk to read data
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Project tutorial by Mirko Pavleski
It's a screen with colorful backlight that shows you some information about printing progress.
Project tutorial by ralex2304
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Project in progress by Cmtelesann
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.
Spending $1,000 on suspension repairs because the city failed to fix the potholes? This project makes sure that never happens again.
Project in progress by Esther He
Or connect with your social account:
New here? Create an account