Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
In this project, you can build and display a sonar system by using graphical programming software Kittenblock, developed based on Scratch3.0
Project tutorial by KittenBot
A cheap DIY air quality monitoring device.
Project tutorial by Mirko Pavleski
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
A digital stadiometer for human height measurement.
Project tutorial by fmarzocca
It can measure fine dust, humidity, temperature and CO2 concentration in the air and check it on the internet in real time.
Project tutorial by 4 developers
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
Copy colours from outside environment.
Project tutorial by Vishwas Navada
An automated humidor using an Arduino — with or without building your own humidor.
Project tutorial by MatthiasDankers
Get the weather information through an Android app constantly and use the solar energy generating by the PV panel to charge devices.
Project tutorial by Kutluhan Aktar
Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.
I am back again with another Arduino based home automation project.
Project tutorial by Tarantula3
Remote temperature monitor using a Bluetooth module and an NTC thermistor. An Android app made with App Inventor is used to read data.
Project tutorial by Federico Vivaldi
During the summers, many people get sunstroke because of playing in the sun for too long. So this device will prevent getting sunstroke.
Project tutorial by Hemesh chadalavada
Evaluate the amount of the energy generated by a solar panel at a given direction through light intensity levels.
Connect Ultrasonic Ranger and MicroSD to Arduino, and program it to record the distance - Quick and Easy!
Project tutorial by Boian Mitov
As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.
Project tutorial by HeathenHacks
A simple device that makes controlling humidity and saving energy a snap. Operates as easily as a thermostat.
Project tutorial by Shaeroden
The ball and beam system is laboratory equipment with high nonlinearity in its dynamics and PID control.
Project tutorial by Karem Ben Chikha
The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.
Project tutorial by ElectronicsLovers
How to use a GY86 (wave measurements) and water temperature sensor.
Project tutorial by T3ch Flicks
Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Or connect with your social account:
New here? Create an account