Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
This is a simple and fun project with pocket friendly budget.
Project tutorial by dnbakshi07
BrewBench - Is an Arduino home brewing kettle temperature monitor, controller and notification system. It can work as a RIMS system.
Project tutorial by BrewBench
I'm going to show you how to make an LCD thermometer with an Arduino UNO and a LM35/36 analog temperature sensor.
Project tutorial by Konstantin Dimitrov
Let us predict the changes around us with Arduino
Project tutorial by Prajjwal Nag
Check the humidity & temperature of your terrarium with a DTH22 humidity and temperature sensor and display this on an LCD I2C 16x2 display.
Project tutorial by Team GiftedMedia
Soil moisture sensor which gives you LCD display of percentage of moisture.
Project tutorial by Patel Darshil
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy
Project tutorial by Technovation
Very useful project made at school that detects some weather data.
Project tutorial by GilettaStefano
A step-by-step tutorial for interfacing an IMU (Inertial Measurement Unit) sensor with an Arduino and reading the Yaw, Pitch & Roll values.
Project tutorial by Aritro Mukherjee
Tracks compass heading, altitude, temperature, pressure, humidity, time, travel distance and GPS location during a hike.
Project tutorial by Shahariar
LIDAR stands for Light Detection and Ranging. LIDAR is used for many applications including 3D scanning, mapping, laser guidance, etc.
Project tutorial by abhinav
Read temperature and humidity values in a remote location and store the data in an SD card.
Project tutorial by Arduino_Genuino
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Project tutorial by Team Oizom
Make an EC/pH/ORP/temperature sensor device to monitor water. Interact with it through a website using Bluetooth Low Energy.
Project tutorial by uFire
Anemometer or a wind speed measuring device is a common weather station instrument. It was costly online, so I built one!
Project tutorial by Achindra Bhatnagar
How to measuring the air quality of the Open Data Institute using an Arduino and a Shinyei PPD-42.
Project tutorial by OpenSensors.io
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Project tutorial by SurtrTech
A fall detection system based on Arduino, Windows 10 and Microsoft Azure
Project tutorial by Jiong Shi
This is a 360 radar using an ultrasonic sensor that saves data and encodes them onto an image.
Project tutorial by Alireza Karkon
Clock without using RTC in Arduino with Temperature and humidity indicator
Project tutorial by ahmadordi
A super smart buoy with lots of sensors that sends data over radio to a base station where it is displayed on a real-time dashboard!
Project tutorial by T3ch Flicks
Use an Arduino, two small servo motors with light sensing photo resistors to steer a solar panel towards the sun. UPDATED
Project tutorial by scott mangiacotti
An Android app-controlled, Arduino-based kit that receives and analyzes humidity and temperature data.
Project tutorial by Diana Khalipina
Or connect with your social account:
New here? Create an account