This project uses sensors to monitor indoor natural gas on the basis of Arduino, and will sound the alarm if the gas leak exceeds the limit.
Project tutorial by Andrew85
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Project tutorial by Kutluhan Aktar
They claim umbrellas own the ability to prevent from UV. We would like to know the fact and measure the UV value under umbrellas.
Project showcase by Team NTPC Young Maker Studio
Planning a scuba dive will be much easier with the data of visibility sensors on the divespot.
Project tutorial by svenvdvoort
Light Status System using Arduino to find the direction and intensity of the light and to receive and process the data in WPF application.
Project tutorial by Alireza Karkon
How to interface a GPS module (NEO-6M) with Arduino Mega. The data for longitude and latitude is displayed on the serial monitor.
Project tutorial by Ruchir Sharma
Arduino and HX711 Load Cell weight scale to keep track of our Bearded Dragon's weight. He's too long for typical kitchen scale.
Project tutorial by John Hart
This system will help prevent accidents caused by drunk driving.
Project tutorial by Ashwini kumar sinha
A handheld monitor for young scientists to get familiar with various aspects of the surrounding environment.
Project tutorial by Chathuranga Liyanage
This project allows you to monitor the temperature and humidity on the web using Arduino Yun.
Project tutorial by FlorinAngelo
Temperature is measured from two different sensors and send data through bluetooth and a set of LEDs is lit according to average temperature
Project tutorial by jomar
Learn how to read Gyroscope Sensor on Arduino 101 and show tilt status on LED.
by Jefferson Paredes
It's a screen with colorful backlight that shows you some information about printing progress.
Project tutorial by ralex2304
This project demonstrates how to make a nightlight by using an Arduino, a PIR motion sensor, and PowerSwitch Tail to turn on a 120V light.
Project tutorial by RobotGeek Projects Team
Read the soil moisture level (Dry-Perfect-Wet) and display results on a corresponding LED.
A smart pollution control device is set near the exhaust of the vehicle to alert the user when they are wasting fuel and causing pollution
by Team Flash
Automatic fans act in stages depending on atmospheric conditions with an alert at full capacity.
Project in progress by Bob Computeers
In this project I created a pretty simple digital level using a LCD screen and a gyro sensor.
Project showcase by elegoo-arduino
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.
Project tutorial by Mirko Pavleski
Millions of gallons of water are wasted every year. Learn to conserve water with this project!
Project tutorial by MD R. Islam
Building a rain sensing alarm with Arduino.
by Smit Babariya
Vehicle dashboard monitor.
Project showcase by Boaz Lawnce
I’m on a mission to reduce the amount of noise my LulzBot Mini 3D printer makes. The stock fan is loud and it's either on or ON!
Project showcase by PlastiBots.com
Or connect with your social account:
New here? Create an account