"ADAFRUIT IO" makes IoT for everyone. Here we publish the data from a photo-resistor and a simulated GPS.
Project showcase by Sebastian Hernandez and Juan Santana
Basic weather system, in/out temp and humidity with heat index, dew point, pressure and weather prediction and time and date.
Project showcase by Fathead
This project detects the various obstacles and plots them on a graph.
Project showcase by Bharath Rao M
A really economic street lighting system.
Project showcase by ReddSathvik
A project that displays the temperature and humidity of a room on your mobile in real time.
Project showcase by Kaustubh Agarwal
Humidity and temperature sensor DHT22 applied to automatic irrigation.
Project showcase by CristianColweb
Reads and stores in SD card, the temperature and humidity values over time.
Project showcase by lmsousa
Trackers generate more electricity than their stationary counterparts due to increased direct exposure to solar rays.
Project showcase by LIMPINGLIM
An easy-to-build and low-cost water quality monitor.
Project showcase by Wen-Liang Lin
This project about tracking object by image processing, and use 360 radar technology (developed by A. Karkon) and status alert system.
Project showcase by Alireza Karkon
We present you the radar we created in the MicroLab lab. This radar uses 2 ultrasonic sensors and 1 motor moving continuously 360 degrees.
Project showcase by MicroLab Greece
This video will illustrate the working principle of the Water Quality Monitoring and Notification System.
Project showcase by emmanuel ani
We are showing how to use DS18B20 one wire water proof temperature sensor using Arduino.
Project showcase by IoTBoys
This is my first project, so please like the project and comment down below.
Project showcase by Imperial_Proggramer
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
Conception of connected bird feeders, able to alert if the seed tank is empty and analyses its use by birds.
Project showcase by ESIEE-Amiens Students
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
Checking out time and room's temperature by one hand shake.
Project showcase by taha_vs
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
In this project I created a pretty simple digital level using a LCD screen and a gyro sensor.
Project showcase by elegoo-arduino
First version of basic Home Weather Station.
Project showcase by derapados
This parking sensor with Arduino is an easy project.
Project showcase by VINICIUS LOPES
This project is about a simple movement detector. Whenever any obstacle comes in a line (predefined) a light will glow.
Project showcase by Sriram MN
How can scientists model and predict the formation of sink holes using IoT?
Project showcase by truthkos
Or connect with your social account:
New here? Create an account