Pulse induction Metal Detector. It can detect a metal coin at a distance of 15 cm and a larger metal object at a distance of 40 cm and more.
Project tutorial by Mirko Pavleski
Use a ratiometric linear Hall effect sensor to build simple magnetic field strength meter.
Learn to build a pocket weather station that displays temperature and humidity using Arduino Nano!
Project tutorial by Tech Nuttiez
We can measure body temperature without contact with this device.
Project tutorial by Akshay Joseph
I am back again with another Arduino based home automation project.
Project tutorial by Tarantula3
A digital stadiometer for human height measurement.
Project tutorial by fmarzocca
The detector can detect a small metal coin at a distance of 15 centimeters.
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Use Arduino and Raspberry Pi to get notified if a hot water heater pilot light goes out.
Project tutorial by Ryan Carlson
How to Make MP2.5 & Co2 Detect Wall Clock for Indoor using Arduino, MG811, GP2Y1014AU Sensor
Project tutorial by DKARDU
A cheap DIY air quality monitoring device.
In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller
Project tutorial by ElectronicsLovers
Simple metal detector capable of detecting a small coin at a distance of 4-5 cm.
Arduino Stepper Motor Barometer with additional displays for last 3 & 6 hour pressure changes.
Project tutorial by Brett Oliver
This is a tipping bucket rain gauge designed in two separate modules; an outdoor sensing unit, and an indoor display with SD card data.
Project tutorial by Bcjams
How to Make a Non-Touch Doorbell, Body Temperature Detection, GY-906, 433MHz using Arduino
Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.
How to make a LED Spirit Level using Arduino and MPU6050 | LED Spirit Level
Project tutorial by Muhammad Ansar
Someone has been eating my cookies! Thankfully Arduino is here to help find out who it is.
Project tutorial by Dante Roumega
Use the IO Expander and accessories to connect OLED screens and I2C sensors over a 100ft away.
Project tutorial by Christian
In this tutorial I will show you how to make gas leak alert security alarm using arduino nano and mq 5 gas sensor
Project tutorial by Shashwat Raj
A simple project to make a GPS log station with data speed, max speed, distance trip and altitude. all data are write on SD card
Project tutorial by wrighi
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
PID control on Arduino with LabView to stabilize a ball on a beam.
Project tutorial by Karem BenChikha
Or connect with your social account:
New here? Create an account