This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.

This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback.

Use the DHT Temperature Sensors in C# code via a C++ Windows Runtime Component to implement a one-wire protocol on Windows 10 and the RPI2.

Use HC-SR04 on Arduino with Processing

A step-by-step tutorial for interfacing an IMU (Inertial Measurement Unit) sensor with an Arduino and reading the Yaw, Pitch & Roll values.

I'm going to show you how to make an LCD thermometer with an Arduino UNO and a LM35/36 analog temperature sensor.

Water quality, anywhere, anytime!

LIDAR stands for Light Detection and Ranging. LIDAR is used for many applications including 3D scanning, mapping, laser guidance, etc.

Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.

Check the humidity & temperature of your terrarium with a DTH22 humidity and temperature sensor and display this on an LCD I2C 16x2 display.

This is the first generation of my Arduino based mini-weather station with Wi-Fi connection, which is able to post data publicly online.

The ESP system make it easy to recognize gestures you make using an accelerometer.

I will explain how connect Arduino with Vibration sensor and LED.

It is a simple tutorial on how to create little a security device using an Arduino.

The sunflower follows the light using a servo motor and two photoresistors.

Soil moisture sensor which gives you LCD display of percentage of moisture.

Short and easy, read distance 2 - 400 cm and plot it in I2C OLED screen.

Here is how to use the YL-39 + YL-69 soil humidity sensor with any Arduino.

This project shows you how to measure Temperature and Humidity and record data on an SD-Card with an Arduino Uno and an Ethernet Shield.

This is a preliminary project that will take you through the steps I took to get the SR04 ULTRASONIC SENSOR.

A fall detection system based on Arduino, Windows 10 and Microsoft Azure

We connect a VL53L0X Laser time-of-flight sensor to an Arduino to measure the liquid level in a tank using ToF ranging.

Anemometer or a wind speed measuring device is a common weather station instrument. It was costly online, so I built one!

Very useful project made at school that detects some weather data.