Water quality, anywhere, anytime!
Project tutorial by Hao Jie Chan
In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller
Project tutorial by ElectronicsLovers
A fall detection system based on Arduino, Windows 10 and Microsoft Azure
Project tutorial by Jiong Shi
Follow this project to make an infrared thermometer by yourself!
Project tutorial by Deion Adel
Open source Smart energy monitor with some new features like Terminal Commands, Readings Logger, and Data Plotting.
Project tutorial by Mohamed Maher
Arduino Uno-based electronic weighing machine by 5-wire 3 kg load cell.
Project tutorial by Boaz Lawnce
This is a 360 radar using an ultrasonic sensor that saves data and encodes them onto an image.
Project tutorial by Alireza Karkon
This is a low cost, modular smart board with wireless capabilities.
Project tutorial by Adellar Irankunda
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Project tutorial by Oizom
Build your own high-quality water sensor to monitor your pool or spa, using the Amazon Alexa to check on the status of your pool.
Project tutorial by Benjamin Winiarski
Geiger counter measuring radioactivity using Arduino Nano in 3D-printed housing, with OLED display and Li-ion battery.
Project tutorial by Pedro52
Air Quality License Plate Holder uses air quality sensor attaching to the vehicle to monitor the air quality through out the city.
Project tutorial by Air Defender
A fire-monitoring and crowdsourcing tool that will allow local fire managers to respond to wildfires.
Project tutorial by Ajdin Nakičević
Send your Arduino to collect data from the edge of space!!
Project tutorial by nmrsthrust
Smart traffic control for more livable cities.
Project tutorial by Balázs Simon
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
How to make a Temperature and Humidity Monitoring System using Arduino and dht11
Project tutorial by Muhammad Ansar
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Project tutorial by Kutluhan Aktar
Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.
Project tutorial by Jade Perreault
A weather monitor that measures 10 environmental properties and sends data to Blynk and over HDMI on the Vidor 4000 (HDMI is still in beta)
Project tutorial by Guntas Singh
Or connect with your social account:
New here? Create an account