In this tutorial I am going to show you how to build a Wireless Weather Station with a big 3.2" Color TFT display using Arduino.
Project tutorial by Nick Koumaris
This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.
Project showcase by Telina
A super smart buoy with lots of sensors that sends data over radio to a base station where it is displayed on a real time dashboard!
Project tutorial by T3ch Flicks
Professional quality wireless weather station.
This is a low cost, modular smart board with wireless capabilities.
Project tutorial by Adellar Irankunda
eNVIRO is an advanced weather station with remote sensor.
Project in progress by antiElectron
Ultra low-cost flow-through photometer for on-line measurements of bacterial density.
by Alex Kutschera
It can measure fine dust, humidity, temperature and CO2 concentration in the air and check it on the internet in real time.
Project tutorial by 4 developers
A tech high-school student-teacher team from Uruguay developing High Altitude Balloons for science! IN ACTIVE DEVELOPMENT!
Project in progress by Team Club AeroEspacial de la Escuela Tecnica de Melo
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Project tutorial by Kutluhan Aktar
The ball and beam system is laboratory equipment with high nonlinearity in its dynamics and PID control.
Project tutorial by Karem Ben Chikha
Or connect with your social account:
New here? Create an account