Water quality, anywhere, anytime!

This is a 360 radar using an ultrasonic sensor that saves data and encodes them onto an image.

A fall detection system based on Arduino, Windows 10 and Microsoft Azure

This kind of system is the fastest growing safety feature in automotive industries.

A remote controlled vehicle with stereo cameras on a head-tracked pan-tilt unit and wireless 3D first person control via an Oculus Rift.

Spending $1,000 on suspension repairs because the city failed to fix the potholes? This project makes sure that never happens again.

Open source Smart energy monitor with some new features like Terminal Commands, Readings Logger, and Data Plotting.

Arduino Uno-based electronic weighing machine by 5-wire 3 kg load cell.

Arduino Stepper Motor Barometer with additional displays for last 3 & 6 hour pressure changes.

IoT + machine learning solution to air pollution in real-time.

Obstacle distance is measured using ultrasonic sensor and Arduino. The data is processed using Processing and the distance is marked.

Developing and mounting sensors on a bike.

eNVIRO is an advanced weather station with remote sensor.

This project about tracking object by image processing, and use 360 radar technology (developed by A. Karkon) and status alert system.

This is a manual and automatic irrigation system

SPACS is an invisible shield for pedestrians designed as an extra safety measure in case of collision or vehicle malfunction.

How can scientists model and predict the formation of sink holes using IoT?

The project consists of reading values for pitch and roll, and communicating the modified values over serial to the display.

Build your own high-quality water sensor to monitor your pool or spa, using the Amazon Alexa to check on the status of your pool.

Control and maintain stable relative humidity and temperature states to simulate natural conditions for experimental testing in the lab.

How to make a Temperature and Humidity Monitoring System using Arduino and dht11

Experimental system for Structural Health Monitoring (SHM), based on the Arduino.

Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.

It is a standard INA219 module but this has an isolated measured voltage from the MCU.