Add hand gestures to your Arduino projects (robots, HMI, lights, etc.).
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Project in progress by Cmtelesann
The sunflower follows the light using a servo motor and two photoresistors.
Project tutorial by Rick_Findus
Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by brunogomezgil
Bicycle odometer and speedometer showing distance traveled, average and current speed (in km/hr), time and can store up to 99 laps.
Project in progress by alan_dewindt
How much time do we waste in traffic jams? I made an Arduino-powered destination notifier to utilize this time in a productive way.
Project tutorial by Amal Mathew
This tutorial will show you how to use DHT11 with Arduino.
Have you ever wanted to measure the speed of air coming out of your vents at home? Well then we have the perfect project for you.
Project tutorial by Ardunicko
This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback.
Project tutorial by Ammar Atef Ali
Using ultrasonic sensors to measure distance of obstacles, taking into account temperature and humidity that affect the speed of sound.
by Giannis Arvanitakis
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
We are showing how to use DS18B20 one wire water proof temperature sensor using Arduino.
Project showcase by Team IoTBoys
A beginner project utilising an Arduino and a BME280 sensor capable of giving you 4 environmental readings.
by Electorials Electronics
Millions of gallons of water are wasted every year. Learn to conserve water with this project!
Project tutorial by MD R. Islam
Uses an accelerometer to level a platform.
Project tutorial by Mark Tashiro
This little project will show you how to use a soil moisture sensor.
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
An Arduino electromechanical barometer.
Project tutorial by Mirko Pavleski
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Project tutorial by SurtrTech
+ LCD/OLED can be used to measure body temperature or to detect movement... in Celsius and Fahrenheit!
In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
Do you want to build an easy security system? Well this is the perfect tutorial for you!
Project tutorial by Abishek Bhalaaji
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
Or connect with your social account:
New here? Create an account