Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Project tutorial by SurtrTech
Need your project to gauge distance? Here's your module!
Here is how to use the YL-39 + YL-69 soil humidity sensor with any Arduino.
Project tutorial by Sorin Trimbitas
This tutorial will show you how to use DHT11 with Arduino.
A beginner-tier project I hope will help the fellows that are newbies in the Arduino world!
Project showcase by onatto22
Arduino learned how to tell the temperature
Project tutorial by Grant
Water level with LED alarms and buzzer with level distance and temp on LCD.
Project tutorial by MichDragstar
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
On the display is printed temperature (celsius) and humidity (%) with a DHT11. When it's raining the LED lights up. You need a rain sensor!
Project showcase by Rick_Findus
Have you ever wanted to measure the speed of air coming out of your vents at home? Well then we have the perfect project for you.
Project tutorial by Ardunicko
An easy project using stuff from the starter kit: Arduino Uno, temperature sensor, 16x2 LCD display, some LEDs and a Piezo.
Project showcase by GioMac
Using the VL53LO and an Arduino for distance measurement.
In this project I made a touch sensor using a coin that works based on Arduino Capacitive Sensing Library.
Project tutorial by Amal Mathew
Cabs4Cabs: Consolidated Arduino Based Sureveillance for Cabs.
Project in progress by Aditi Ja and Drishti Kanjilal
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can issue AT commands from your computer.
Trackers generate more electricity than their stationary counterparts due to increased direct exposure to solar rays.
Project showcase by LIMPINGLIM
This parking sensor with Arduino is an easy project.
Project showcase by VINICIUS LOPES
A simple tutorial on getting readings from an ultrasonic sensor
by Damien Murtagh
A standard speaker can be used to detect vibrations and send data to a microcontroller.
This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
It measures the distance between you and the place where you point it to. Hope you'll enjoy it!
How to use the small module to measure distance for high frequency applications... or low.
Or connect with your social account:
New here? Create an account