Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
Generates maps based on distance between itself and obstacles autonomously and provides visual feedback.
Project tutorial by Satyavrat Wagle
Build a simple shutter speed tester for film cameras.
Project tutorial by hiroshootsfilm
A simple Electromagnetic Field Detector.
Project showcase by justin1445
A device which can measure light intensity, easy to built and use. Let's make one using Arduino microcontroller. Keeping portability in mind
Project tutorial by Lithium ION
The construction is really simple thanks to the microcontroller, but also the module for weak signal amplification with LM358 IC.
Project tutorial by Mirko Pavleski
Check out how you can easily sense magnetic fields in 3D with Infineon's 3DSense Shields2Go
by Infineon Team
Made a Fume Extractor by using a custom Attiny13 Based Motor driver board and 3D Printed Body,
Project tutorial by Arnov Sharma
Interested in building a METAL DETECTOR that can detect 10m/33ft depth, building a SOLAR STORM or AURORA observatory?
This tutorial will show you how to use DHT11 with Arduino.
This tutorial shows how to control an RGB LED using an Arduino board and 1Sheeld.
Project tutorial by Zowail
Water level with LED alarms and buzzer with level distance and temp on LCD.
Project tutorial by MichDragstar
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
How to make a sensor yourself, and then with the help of a microcontroller to accurately determine the level of liquid in the container.
Controls cursor using a simple joystick
Project tutorial by Shubham Santosh
Short and easy, read distance 2 - 400 cm and plot it in I2C OLED screen.
Project tutorial by javier muñoz sáez
UltrasonicEyes is a fun and quirky project you can place somewhere and watch as it looks at things moving around in front of it. Freaky!
Project tutorial by Unexpected Maker
This is a “magic wand” which can be waved to cast a variety of spells. It takes sensor data as input and outputs a simple classification.
Project showcase by Team MagicalZoo
An easy setup for smart air purifier system. This system use Amazon IoT with MQTT protocol to get real-time data of air quality condition.
Project tutorial by Aaron Kow
This project is a good learning project to get comfortable with soldering and programming an Arduino.
Project tutorial by Jen Looper
My daughter is getting adventurous in her cycling, so I put together a simple logger and speedo to show where she traveled
Project tutorial by au_chrismor
A simple VU meter realized with only mechanical typical items, as screws or nuts, but powered by Arduino!
Project tutorial by marcocroce
Despite its simplicity, it has a relatively good sensitivity and perfect stability during operation
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
Or connect with your social account:
New here? Create an account