This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.
Project tutorial by ThothLoki
Controls cursor using a simple joystick
Project tutorial by Shubham Santosh
Clock without using RTC in Arduino with Temperature and humidity indicator
Project tutorial by ahmadordi
This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback.
Project tutorial by Ammar Atef Ali
How to interface an IR sensor with an Arduino Uno.
Project tutorial by Alfa
A simple VU meter realized with only mechanical typical items, as screws or nuts, but powered by Arduino!
Project tutorial by marcocroce
It is a simple tutorial on how to create little a security device using an Arduino.
Project tutorial by Ivan
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
A step-by-step tutorial for interfacing an IMU (Inertial Measurement Unit) sensor with an Arduino and reading the Yaw, Pitch & Roll values.
Project tutorial by Aritro Mukherjee
How much time do we waste in traffic jams? I made an Arduino-powered destination notifier to utilize this time in a productive way.
Project tutorial by Amal Mathew
Measure your light intensity lux using this sensor and simple code.
Project tutorial by afsh_ad
+ OLED display, measures in imperial and metric.
Project tutorial by SurtrTech
How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.
Project tutorial by hwhardsoft
Use an Arduino, two small servo motors with light sensing photo resistors to steer a solar panel towards the sun. UPDATED
Project tutorial by scott mangiacotti
Short and easy, read distance 2 - 400 cm and plot it in I2C OLED screen.
Project tutorial by javier muñoz sáez
Check the humidity & temperature of your terrarium with a DTH22 humidity and temperature sensor and display this on an LCD I2C 16x2 display.
Project tutorial by GiftedMedia
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
I'm going to show you how to make an LCD thermometer with an Arduino UNO and a LM35/36 analog temperature sensor.
Project tutorial by Konstantin Dimitrov
Hi, my name is Rohan Barnwal and in this project, I taught you how you can create your own Cheap Infrared Gun Using Arduino Uno
Project tutorial by Rohan Barnwal
Super easy project using an arduino uno to detect speed of various moving objects with the help of a pair of IR sensors and get the speed.
Project tutorial by yashastronomy
Find the distance from one point to another faster!
Project tutorial by Saaket Poray
PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small
Project tutorial by DIY Partners
Makes use of a thermistor to display a colour on an RGB LED (One Pixel).
Project tutorial by Ian Cumming
Soil moisture sensor which gives you LCD display of percentage of moisture.
Project tutorial by Patel Darshil
Or connect with your social account:
New here? Create an account