Clouds meter <> establish the height of clouds through an IR measurement temperature of saturation.
Project in progress by KFMAKR
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
by Muhammad Aqib
How to make a color sensing device using a TCS3200 color sensor.
Project tutorial by munazirali4793 and Creatjet3D-Labs
This project will show you how to make a DIY Intrusion Detection System.
Project tutorial by STEMpedia
Move your hand around - lights ON. Move hands over that again - lights OFF. Cool, right?
Project tutorial by ashraf_minhaj
An automated probe that collect CO2 flux data on lake Mendota, WI.
Project showcase by SHUAI ZHANG
An Android app-controlled, Arduino-based kit that receives and analyzes humidity and temperature data.
Project tutorial by Diana Khalipina
Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.
Project tutorial by Kutluhan Aktar
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
This project will calculate the water content of soil around a plant by measuring the dielectric constant.
Project tutorial by millerman4487
How to build an humidity and temperature meter with time display from an old voltage meter casing.
Project showcase by Mr_Xu
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
An environmental monitoring system using a Nano, with GPS, BME680, VEML6070, MiCS-5524, BH1750, a 128x64 OLED, and NeoPixels.
Project in progress by Pyre Mage
A simple humidity, temperature, and pressure data logger.
Project showcase by matthew Champion
A compact air quality, temperature and humidity monitor enclosed in a small wooden chest, with a four-row LCD display.
Project tutorial by Fillbee
Here we use PIR sensor and Arduino to detect the motion of a hand. This detection can be used to operate electronic equipment.
Project tutorial by ElectroPeak
This system will help prevent accidents caused by drunk driving.
Project tutorial by Ashwini kumar sinha
This project shows how to use MATLAB and Arduino to acquire and fix data from a bundle of DHT22 sensors, live plot, and export the results.
Project tutorial by dancili
Monitoring Industries using the power of Internet and automation.
Project tutorial by Vimarsh
Arduino + LCD + DHT11 sensor + Lego = Awesome temp/humidity display
Project tutorial by YENFU CHEN
You activate the bomb by plugging it and hold button to defuse.
Project showcase by Nashboss100
Design and build a system for monitoring structural movements in smart buildings with Infineon 3D Magnetic 2Go.
Project tutorial by Gabriel Alejandro Giraldo Santiago
An SKU237545 pressure sensor.
Or connect with your social account:
New here? Create an account