The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Project in progress by philippedc
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
Project in progress by Gabriel Alejandro Giraldo Santiago
A pantry which can automatically replenish kitchen items.
Project in progress by Md. Khairul Alam
A device which collects data (environmental, soil and photosynthesis values) of plant(s) and then stores/analyze using a MKR1000 and Azure.
Project in progress by Ryan Michaud
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Kavyashree P
This Smart Blind Assistant helps blind people to sense their environment. This assist device can also be connected through Bluetooth.👁️
Project in progress by Chandru S
An environmental monitoring system using a Nano, with GPS, BME680, VEML6070, MiCS-5524, BH1750, a 128x64 OLED, and NeoPixels.
Project in progress by Pyre Mage
The Zeus Weather Station (ZEWS) is an initiative of the Harry Fultz Institute Open Source Club to promote open source hardware and software.
Project in progress by moisi
Open source air quality sensor network platform.
Project in progress by Team BYU Smart City Project
Automated colour transmission and reflection measurement system for quantifying results of measurements with a colour change.
Project in progress by Eric Lowe
Smart IOT Propane Pedestal capable of tracking propane level as well as detecting any propane leaks. Integration with Amazon Alexa.
Project in progress by A Bit Gassy
We aim to provide a low-cost precision agriculture solution powered by biophotovoltaics, and we start with developing a prototype.
Project in progress by eCO-SENSE
Did something move and when?
Project in progress by Frazer Reid
If you can't fix it in software you'll have to fix it in hardware in this case. Hence the NMEAtor.
Project in progress by Waps 61
An Arduino-based altimeter, mostly for model rocketry.
Project in progress by M4K3R_4_M4R5
Or connect with your social account:
New here? Create an account