Use the IO Expander and accessories to connect OLED Screens and I2C Sensors over a 100ft away.
Project tutorial by Christian
Project stabilometric platform made with Arduino. Stabilometric platform can be used for medical rehabilitation and games.
Improve reliability of measurements using PPD42NS sensor using modular 3D printed solution which includes exclosure box for sensor.
Project tutorial by Mirko Pavleski
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Kavyashree P
A cheap DIY air quality monitoring device.
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
A simple device that makes controlling humidity and saving energy a snap. Operates as easily as a thermostat.
Project tutorial by Shaeroden
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
How to use a GY86 (wave measurements) and water temperature sensor.
Project tutorial by T3ch Flicks
This fully functioning Geiger counter was designed after the PKE Meter from the 1980s Ghostbusters movie.
Project showcase by mvonsivers
The detector can detect a small metal coin at a distance of 15 centimeters.
Pulse induction metal detector, built on the Arduino Nano.
Project showcase by FoxyLab
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
Project tutorial by dev009
A digital stadiometer for human height measurement.
Project tutorial by fmarzocca
How long were we released from the gravity of the Earth? This machine measures how many seconds we are zero gravity state.
Project showcase by hminowa
The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.
Project tutorial by ElectronicsLovers
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.
Project tutorial by Kutluhan Aktar
How to build an humidity and temperature meter with time display from an old voltage meter casing.
Project showcase by Mr_Xu
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
An environmental monitoring system using a Nano, with GPS, BME680, VEML6070, MiCS-5524, BH1750, a 128x64 OLED, and NeoPixels.
Project in progress by Pyre Mage
Or connect with your social account:
New here? Create an account