A cheap DIY air quality monitoring device.
Project tutorial by Mirko Pavleski
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
A simple device that makes controlling humidity and saving energy a snap. Operates as easily as a thermostat.
Project tutorial by Shaeroden
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
How to use a GY86 (wave measurements) and water temperature sensor.
Project tutorial by T3ch Flicks
The detector can detect a small metal coin at a distance of 15 centimeters.
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Project tutorial by dev009
A digital stadiometer for human height measurement.
Project tutorial by fmarzocca
The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.
Project tutorial by ElectronicsLovers
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.
Project tutorial by Kutluhan Aktar
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Here we use PIR sensor and Arduino to detect the motion of a hand. This detection can be used to operate electronic equipment.
Project tutorial by ElectroPeak
Get the weather information through an Android app constantly and use the solar energy generating by the PV panel to charge devices.
Portable range/distance detection device using an Arduino, ultrasonic sensor, and buzzer.
Project tutorial by Viktor S
Alexa-enabled smoke, flame alarm with emergency lighting.
Project tutorial by oleolsonfablab
This coaster detects the temperature of a cup. You get a signal when it is ready to drink.
Project tutorial by jensmalmgren
In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller
Dear friends welcome to another tutorial! Today we are going to build an interesting Arduino project which is using a fingerprint sensor ...
Project tutorial by Nick Koumaris
Arduino Nano and Visuino: Plot BME280 Temperature, Humidity and Pressure on Nextion Display Scope - Quick and Easy
Project tutorial by Boian Mitov
It is hard to measure the height of the children. So, we made Height Measure using distance sensor VL53L0X.
Project tutorial by HomeMadeGarbage
BH1715 is a digital Ambient Light Sensor with an I²C bus interface. The BH1715 is commonly used to obtain the ambient light data.
Project tutorial by Dcube Tech Ventures
Power monitoring, appliance detection using Arduino and save data into a Text file, Google Sheet for creating graphs and analysis.
Project tutorial by bhaskar
Or connect with your social account:
New here? Create an account