Simple metal detector capable of detecting a small coin at a distance of 4-5 cm.
Project tutorial by Mirko Pavleski
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Here we use PIR sensor and Arduino to detect the motion of a hand. This detection can be used to operate electronic equipment.
Project tutorial by ElectroPeak
The detector can detect a small metal coin at a distance of 15 centimeters.
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Dear friends welcome to another tutorial! Today we are going to build an interesting Arduino project which is using a fingerprint sensor ...
Project tutorial by Nick Koumaris
Let us predict the changes around us with Arduino
Project tutorial by Prajjwal Nag
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
It is hard to measure the height of the children. So, we made Height Measure using distance sensor VL53L0X.
Project tutorial by HomeMadeGarbage
Arduino Nano and Visuino: Plot BME280 Temperature, Humidity and Pressure on Nextion Display Scope - Quick and Easy
Project tutorial by Boian Mitov
Portable range/distance detection device using an Arduino, ultrasonic sensor, and buzzer.
Project tutorial by Viktor S
Control the temperature of the rooms you are actually in
Project tutorial by BuddyC
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
A simple project to make a GPS log station with data speed, max speed, distance trip and altitude. all data are write on SD card
Project tutorial by wrighi
Power monitoring, appliance detection using Arduino and save data into a Text file, Google Sheet for creating graphs and analysis.
Project tutorial by bhaskar
A simple device that makes controlling humidity and saving energy a snap. Operates as easily as a thermostat.
Project tutorial by Shaeroden
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
How to use a GY86 (wave measurements) and water temperature sensor.
Project tutorial by T3ch Flicks
This is a tipping bucket rain gauge designed in two separate modules; an outdoor sensing unit, and an indoor display with SD card data.
Project tutorial by Bcjams
A cheap DIY air quality monitoring device.
This coaster detects the temperature of a cup. You get a signal when it is ready to drink.
Project tutorial by jensmalmgren
A digital stadiometer for human height measurement.
Project tutorial by fmarzocca
Get the weather information through an Android app constantly and use the solar energy generating by the PV panel to charge devices.
Project tutorial by Kutluhan Aktar
The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.
Project tutorial by ElectronicsLovers
Or connect with your social account:
New here? Create an account