Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller
Project tutorial by ElectronicsLovers
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
A cheap DIY air quality monitoring device.
Project tutorial by Mirko Pavleski
The detector can detect a small metal coin at a distance of 15 centimeters.
Pulse induction metal detector, built on the Arduino Nano.
Project showcase by FoxyLab
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
A simple device that makes controlling humidity and saving energy a snap. Operates as easily as a thermostat.
Project tutorial by Shaeroden
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
How to use a GY86 (wave measurements) and water temperature sensor.
Project tutorial by T3ch Flicks
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Power monitoring, appliance detection using Arduino and save data into a Text file, Google Sheet for creating graphs and analysis.
Project tutorial by bhaskar
Portable range/distance detection device using an Arduino, ultrasonic sensor, and buzzer.
Project tutorial by Viktor S
It is hard to measure the height of the children. So, we made Height Measure using distance sensor VL53L0X.
Project tutorial by HomeMadeGarbage
This fully functioning Geiger counter was designed after the PKE Meter from the 1980s Ghostbusters movie.
Project showcase by mvonsivers
Dear friends welcome to another tutorial! Today we are going to build an interesting Arduino project which is using a fingerprint sensor ...
Project tutorial by Nick Koumaris
Like God's Sight || Arduino Nano based PIR motion tone alarm.
by Boaz Lawnce
The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
A digital stadiometer for human height measurement.
Project tutorial by fmarzocca
Project tutorial by dev009
This project is about a simple movement detector. Whenever any obstacle comes in a line (predefined) a light will glow.
Project showcase by Sriram MN
The HMC5883is a digital compass designed for low-field magnetic sensing. This device has a wide magnetic field range of +/-8 Oe.
by Dcube Tech Ventures
Or connect with your social account:
New here? Create an account