Build your own IoT-based water quality monitoring system WITHOUT any TDS/pH meter !!
Project tutorial by aman_a_shastry
Track your face using OpenCV's facial recognition.
Project showcase by Shubham Santosh
Hazardous Gas leak detection system employ an audible alarm to alert people and lock all the air tight gates.
Project tutorial by 3 developers
An Arduino Uno project which uses lasers to read and indicate if your car is parked correctly within a zone.
Project tutorial by Bryce Lukens
Turning a normal chair into a smart chair that will continuously detect your sitting posture and sends an alarm for wrong postures.
Project tutorial by Ibrahim Yassine
In this project, I will design a simple Arduino Car Reverse Parking Sensor Circuit using Arduino UNO and HC-SR04 Ultrasonic Sensor.
Project tutorial by mudit_5246
Consistently individuals bring about an enormous loss of property a life because of fire and blasts. Fire being one of the savage component
Project showcase by Sagnik Ghosh
Provide continuous info about room temperature, humidity, CO2 and luminoscity levels and turn on leds at the end of the work to relax eyes
Project tutorial by Diana Khalipina
Non-contact temperature measurement using GY-90615 IR sensor.
Project tutorial by engineeringuofs
Brainium Bridge Baby Monitor for predictive maintenance in bridges.
Project tutorial by Victor Altamirano and Alejandro Sanchez
Project tutorial by Techatronic
CO2 monitor and log based on MQ-135 with temperature and relative humidity correction.
Project showcase by ArduinoKoen
In this project I show how to build a particles detector with data display, data backup on SD card and IoT with Android application.
The values of t° sensors DS18B20, waterproofed DS18B20, AM2302 will be compared with micro:bit temperature sensor and standard thermometer.
This project shows how to find our lat and long of our location using a GPS module.
Project tutorial by Sanju's Robotics Studio
Measure the dew point and humidity with an Arduino-based Chilled Mirror Hygrometer.
Project tutorial by schouten_tjeerd
Add extra layer of security to your ATM machine transactions with biometric fingerprint and OTP SMS.
Project tutorial by Brijesh Singh
This Instruction will show how to make a box which can indicate temperature and humidity with Arduino
Project tutorial by engineer2you
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Project in progress by philippedc
Put on your aerospace engineering hat! Explore how different materials absorb and transmit heat to simulate space capsule re-entry to earth!
by Jen Fox and Hacking STEM
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
by Hacking STEM and Jen Fox
The Zeus Weather Station (ZEWS) is an initiative of the Harry Fultz Institute Open Source Club to promote open source hardware and software.
Project in progress by moisi
We aim to provide a low-cost precision agriculture solution powered by biophotovoltaics, and we start with developing a prototype.
Project in progress by eCO-SENSE
Or connect with your social account:
New here? Create an account