Code and explanation for getting directional and motion data from the raw sensor outputs.
by Samhita Ganguly and Shubham Paul
This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
by Muhammad Aqib
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
A useful tool to visualize at real time data of the MPU9250 sent through a COM port.
This lesson aims to show how to use the famous PCF8563 (a real time clock RTC) with Arduino through the library written by Joe Robertson.
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
Monitor the quality of your sleep and live better.
by Team SrVassili
The HMC5883is a digital compass designed for low-field magnetic sensing. This device has a wide magnetic field range of +/-8 Oe.
by Dcube Tech Ventures
Detect the presence of alcohol with Arduino.
by Yashik Ibrahim
SHT25 I2C Humidity and Temperature Sensor ±1.8%RH ±0.2°C I2C Mini Module.
Real-time pH and salinity monitoring with LED indicators.
by Atlas Scientific
CPS120 is a high quality and low cost capacitive absolute pressure sensor with fully compensated output.
A system to maintain the pH level of a sample within a defined range.
An IoT device to automatically switch on/off electronic appliances based on the availability of human beings, especially in public services.
by Revathi Kannan
How to build a simple and accurate thermometer using an active temperature sensor (MCP9071/A).
MCP9808 is a highly accurate digital temperature sensor ±0.5°C I2C mini module.
BMA250 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g.
This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
by Shubham Shinganapure
BMG160 is basically a 16-bit, digital, tri-axial, gyroscope sensor which can measure angular rates.
In this project I will guide you on how to make your own Arduino Chameleon using TCS3200 and Arduino Uno.
by Manan Thareja
Recently frauds in eCommerce delivery have increased drastically. What can Azure do about it? Check it out.
by Karthikeyan Balasubramanian
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
by Jen Fox and Hacking STEM
Building a rain sensing alarm with Arduino.
by Smit Babariya
Or connect with your social account:
New here? Create an account