Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
by Dragos Iosub
Temperature is measured from two different sensors and send data through bluetooth and a set of LEDs is lit according to average temperature
Project tutorial by jomar
You can close your eyes, but you cannot close your ears.
Project tutorial by MANO and Nekhil ravi
An IoT device to automatically switch on/off electronic appliances based on the availability of human beings, especially in public services.
by Revathi Kannan
Make a fire detector in minutes with Samsung ARTIK Cloud, Arduino UNO and Raspberry Pi.
Project tutorial by Samsung IoT
The Zeus Weather Station (ZEWS) is an initiative of the Harry Fultz Institute Open Source Club to promote open source hardware and software.
Project in progress by moisi
This project about tracking object by image processing, and use 360 radar technology (developed by A. Karkon) and status alert system.
Project showcase by Alireza Karkon
How to interface a GPS module (NEO-6M) with Arduino Mega. The data for longitude and latitude is displayed on the serial monitor.
Project tutorial by Ruchir Sharma
Teaches you how to use the Piezo vibration sensor in the Arduino Grove starter kit.
I’m on a mission to reduce the amount of noise my LulzBot Mini 3D printer makes. The stock fan is loud and it's either on or ON!
Project showcase by PlastiBots.com
"ADAFRUIT IO" makes IoT for everyone. Here we publish the data from a photo-resistor and a simulated GPS.
Project showcase by Sebastian Hernandez and Juan Santana
This project uses sensors to monitor indoor natural gas on the basis of Arduino, and will sound the alarm if the gas leak exceeds the limit.
Project tutorial by Andrew85
Planning a scuba dive will be much easier with the data of visibility sensors on the divespot.
Project tutorial by svenvdvoort
This project allows you to monitor the temperature and humidity on the web using Arduino Yun.
Project tutorial by FlorinAngelo
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
Has your phone ever told you that it rained and you didn't water your plants and then it actually didn't and your plants died? Never Again!
Project tutorial by King Bros
Did something move and when?
Project in progress by Frazer Reid
As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.
Project tutorial by HeathenHacks
Want to get notified before your mom storms into your room? I will help you with this project using a 1Sheeld.
Project tutorial by Ensaf Atef
This co-working space has a very poor air conditioning system. Now I have a little help from my MicroView Micro Meteo Station.
Project tutorial by Giovanni Gentile
This tutorial shows how to control an RGB LED using an Arduino board and 1Sheeld.
Project tutorial by Zowail
In this Tutorial I am going to show you how to build a very useful UV meter with a big Nokia 5110 LCD display using Arduino. Protect ...
Project tutorial by Nick Koumaris
Move your hand around - lights ON. Move hands over that again - lights OFF. Cool, right?
Project tutorial by ashraf_minhaj
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.
Or connect with your social account:
New here? Create an account