Periodically measure environmental conditions and send them to WolkAbout IoT Platform to monitor the environment remotely.
Project tutorial by WolkWriter
Using one single module and a proper library you'll be able to measure any AC voltage like a TRMS multimeter.
Project tutorial by SurtrTech
During the summers, many people get sunstroke because of playing in the sun for too long. So this device will prevent getting sunstroke.
Project tutorial by Hemesh chadalavada
An Arduino electromechanical barometer.
Project tutorial by Mirko Pavleski
Glowing LED to detect the increase in pressure by pressure pad using Arduino.
Project tutorial by Ashish Kumar Senapati
Build a weather station with Arduino & ASP.NET Core.
Project tutorial by Zhang Yuexin
This project is a GPS tracking system with LCD display using an Arduino Uno and a Digilent PmodGPS.
Project tutorial by Ian Etheridge
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Project tutorial by Kutluhan Aktar
This project will attempt to show how much alcohol is in the air (semi-quantitative measurements).
Project tutorial by ScottC
How much time do we waste in traffic jams? I made an Arduino-powered destination notifier to utilize this time in a productive way.
Project tutorial by Amal Mathew
How to make a color sensing device using a TCS3200 color sensor.
Project tutorial by munazirali4793 and Creatjet3D-Labs
This project will demonstrate how to build a water level monitor using an Arduino Nano, a Solu SL067 water level sensor, and an indicator.
Project tutorial by NewMC
This project will show you how to make a DIY Intrusion Detection System.
Project tutorial by STEMpedia
A short and easy tutorial on how to interface the module with UNO board using simple examples.
Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.
Project tutorial by Jade Perreault
Build a simple incident light meter for old meterless film cameras
Project tutorial by Alan Wang
Move your hand around - lights ON. Move hands over that again - lights OFF. Cool, right?
Project tutorial by ashraf_minhaj
An Android app-controlled, Arduino-based kit that receives and analyzes humidity and temperature data.
Project tutorial by Diana Khalipina
Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.
This project will calculate the water content of soil around a plant by measuring the dielectric constant.
Project tutorial by millerman4487
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Evaluate the amount of the energy generated by a solar panel at a given direction through light intensity levels.
This is the first version of my Arduino Weather Station, a very simple project that will give you weather information.
Project tutorial by Gabriele Scordamaglia
A compact air quality, temperature and humidity monitor enclosed in a small wooden chest, with a four-row LCD display.
Project tutorial by Fillbee
Or connect with your social account:
New here? Create an account