An easy-to-build and low-cost water quality monitor.
Project showcase by Wen-Liang Lin
Senses for smoke in the air near a 3D printer and will sound an alarm and turn off power to the printer if smoke is detected.
Project tutorial by Miles Nash
Just before creating my next tutorial, which will be using a PIR sensor, I thought I might create a separate tutorial for PIR Sensor.
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
Project showcase by Team Technozz
The comfort level was symbolized by blinking 5 different colored LED using HUMIDEX (a combined parameter of temperature and humidity).
Project tutorial by somenjana
Portable range/distance detection device using an Arduino, ultrasonic sensor, and buzzer.
Project tutorial by Viktor S
UltrasonicEyes is a fun and quirky project you can place somewhere and watch as it looks at things moving around in front of it. Freaky!
Project tutorial by Unexpected Maker
Water level with LED alarms and buzzer with level distance and temp on LCD.
Project tutorial by MichDragstar
A small, Arduino-based physical device that can perform different keyboard operations through capacitive touch sensing.
Project tutorial by Amal Mathew
This device can remind user to drink water after a set time interval and can remind users when the water is at a right temperature for drink
Project showcase by Team HB
It is a device that measures CO2 levels, inside and outside temperatures, and humidity.
Project tutorial by Anton
I am back again with another Arduino based home automation project.
Project tutorial by Tarantula3
Smart IOT Propane Pedestal capable of tracking propane level as well as detecting any propane leaks. Integration with Amazon Alexa.
Project in progress by Team A Bit Gassy
An easy-to-build humidifier with RGB backlight that can be controlled by Amazon Alexa.
Project tutorial by Andrii Romanenko
Build your own high-quality water sensor to monitor your pool or spa, using the Amazon Alexa to check on the status of your pool.
Project tutorial by Benjamin Winiarski
Sick of your laptop underperforming or burning you? Check this out!
Project tutorial by Dante Roumega
We present you the radar we created in the MicroLab lab. This radar uses 2 ultrasonic sensors and 1 motor moving continuously 360 degrees.
Project showcase by Team MicroLab Greece
Has your phone ever told you that it rained and you didn't water your plants and then it actually didn't and your plants died? Never Again!
Project tutorial by King Bros
This is my first project, so please like the project and comment down below.
Project showcase by Imperial_Proggramer
PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small
Project tutorial by DIY Partners
You can control internal environment with Magconn. Just combining Magconn module and Sensor. This system is easy and wireless control.
Project tutorial by Team Kangwon National University ECEE
It reads from up to eight temperature sensors (DS18B20) and displays on the LCD display (16x2)
Trackers generate more electricity than their stationary counterparts due to increased direct exposure to solar rays.
Project showcase by LIMPINGLIM
MQ2 Sensor is a gas module and it is suitable to detect Hydrogen, LPG, Smoke, CO, and Alcohol. It has high sensitivity and fast response.
by Junez Riyaz
Or connect with your social account:
New here? Create an account