How to interface a GPS module (NEO-6M) with Arduino Mega. The data for longitude and latitude is displayed on the serial monitor.

Detect the presence of alcohol with Arduino.

Like a real pyranometer, realize a measurement of sun power.

Clouds meter <> establish the height of clouds through an IR measurement temperature of saturation.

If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.

This project will show you how to make a DIY Intrusion Detection System.

Monitoring Industries using the power of Internet and automation.

Design and build a system for monitoring structural movements in smart buildings with Infineon 3D Magnetic 2Go.

We built this to help our farmer friend in Thailand track his truck to prevent rice theft.

Temperature and humidity control to achieve the ideal confort conditions. The system work in a automatic way without a manual control.

THGadget is a temperature, humidity and date/time Arduino Mega 2560-based device. The sensors: DHT11 and RTC HT1380.

It is a device that measures CO2 levels, inside and outside temperatures, and humidity.

Smart weather prediction device which send data to wunderground and receives the predicted 10 day forecast.

Learn how to model the sensor and getting a reliable distance measurement using Simulink and Arduino.

Learn how to model the sensor and getting a reliable distance measurement using Simulink and Arduino.

Temperature is measured from two different sensors and send data through bluetooth and a set of LEDs is lit according to average temperature

Dear friends welcome to another Arduino project tutorial! In this tutorial we are going to take a first look at the new BME280 sensor, a ...

How to build a simple and accurate thermometer using an active temperature sensor (MCP9071/A).

How build a simple thermometer using a silicon diode

Build your Fire Alarm System at home with Arduino UNO. In this tutorial, you will learn all steps to DIY  Arduino fire alert system.

I have started to build it for a homemade amplifier, to set the speed of the fans by the temp of the heathsink and so on.

An Arduino-based touchscreen advanced weather station with increased accuracy using precision pressure, temperature and humidity sensors.

Driver for the LIDARLite v2 and v3 on the Arduino, with many improvements over the base library (Robustness, asynchronous).

Now after connecting all the hardware to the respective pins we start integrating the software for getting MPU readings.