Lets talk about this Sharp Distance Sensor
by Ingo Lohs
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
Put on your aerospace engineering hat! Explore how different materials absorb and transmit heat to simulate space capsule re-entry to earth!
This project will show you how to use an MQ-2 gas sensor.
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
In this tutorial, you’ll learn how to use the LSM303DLHC GY-511 compass module with Arduino to make a digital compass.
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
by Dragos Iosub
How to read HDC2010 temperature and humidity sensor data and comfort zone alerts Arduino using HDC2010 I2C breakout by itbrainpower.net.
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
How to temperature compensate the Atlas salinity sensor automatically.
by Atlas Scientific
Real-time pH and salinity monitoring with LED indicators.
A system to maintain the pH level of a sample within a defined range.
Building a rain sensing alarm with Arduino.
by Smit Babariya
This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
by Shubham Shinganapure
In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
This little project will show you how to use a soil moisture sensor.
Read data from an absolute orientation sensor without writing any code!
by Matt Wayland
This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
by Muhammad Aqib
I found limited documentation on the usage of a color sensor I recently purchased, so here is my attempt to make it more simple.
Ultra low-cost flow-through photometer for on-line measurements of bacterial density.
by Alex Kutschera
A standard speaker can be used to detect vibrations and send data to a microcontroller.
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
Or connect with your social account:
New here? Create an account