Improve reliability of measurements using PPD42NS sensor using modular 3D printed solution which includes exclosure box for sensor.
Project tutorial by Mirko Pavleski
Don’t you wish your plants would tell you when they needed to be watered? Take your project from breadboard to PCB with this fun tutorial.
Project tutorial by Patchr
Measure the dew point and humidity with an Arduino-based Chilled Mirror Hygrometer.
Project tutorial by schouten_tjeerd
Add extra layer of security to your ATM machine transactions with biometric fingerprint and OTP SMS.
Project tutorial by Brijesh Singh
Capacitance capabilities at the tip of your finger!
Project tutorial by Tal O
A cheap DIY air quality monitoring device.
Build a table lamp that's sturdy and smart.
Project tutorial by msr048
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
Detect movement up to 30' away which is useful in motion-activated projects such as a security system or automatic lighting in a classroom.
Project tutorial by ejshea
Literally the simplest way to make a weather station!
Project tutorial by Mission Critical
How to interface a GPS module (NEO-6M) with Arduino Mega. The data for longitude and latitude is displayed on the serial monitor.
Project tutorial by Ruchir Sharma
Sunglasses that serve an even more useful purpose than protecting the eyes of the blind. They can help them detect objects in front of them.
Project tutorial by GardnerTech
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
You can close your eyes, but you cannot close your ears.
Project tutorial by Team Xspies
This smart stick can help blind people walk on the street safely without any help.
Project tutorial by hadi1234
Speedometer that uses a GPS for speed sensing and an RGB LED to indicate speed to the user. Also features a blinking white light.
Project tutorial by Jeremy S. Cook
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
It's a screen with colorful backlight that shows you some information about printing progress.
Project tutorial by ralex2304
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
Copy colours from outside environment.
Project tutorial by Vishwas Navada
Or connect with your social account:
New here? Create an account