Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.

Copy colours from outside environment.

A digital stadiometer for human height measurement.

The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.

UltrasonicEyes is a fun and quirky project you can place somewhere and watch as it looks at things moving around in front of it. Freaky!

Create a burglar-tripwire with the ultrasonic sensor.

Someone has been eating my cookies! Thankfully Arduino is here to help find out who it is.

An Arduino based device to read multiple DS18B20 sensors and send the values through a RS232 connection to a domotica system.

Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.

Dear friends welcome to another tutorial! Today we are going to build an interesting Arduino project which is using a fingerprint sensor ...

It can measure fine dust, humidity, temperature and CO2 concentration in the air and check it on the internet in real time.

As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.

Portable distance detection device using an Arduino and an ultrasonic sensor.

In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller

In this tutorial I am going to show you how to build a Wireless Weather Station with a big 3.2" Color TFT display using Arduino.

The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.

During the summers, many people get sunstroke because of playing in the sun for too long. So this device will prevent getting sunstroke.

Build a weather station with Arduino & ASP.NET Core.

Here we use PIR sensor and Arduino to detect the motion of a hand. This detection can be used to operate electronic equipment.

If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.

This project will demonstrate how to build a water level monitor using an Arduino Nano, a Solu SL067 water level sensor, and an indicator.

Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.

Evaluate the amount of the energy generated by a solar panel at a given direction through light intensity levels.

Get the weather information through an Android app constantly and use the solar energy generating by the PV panel to charge devices.