A small COVID medical kit that measures SPO2, Heart Rate and ECG. ECG readings are analyzed and shared via Matlab on to ThingSpeak.
Project tutorial by Ninety99
Cars have turn signals, why not bikes? LightVest is an Arduino turn signal bike safety vest designed to be a wearable tech for cyclists.
Project tutorial by Eben Kouao
While I exercise it plays music to keep me motivated and afterwards dispenses a reward, a Tic Tac!
Project tutorial by Nikolaos Babetas
A TinyML based Medical device powered by Edge Impulse to predict Atrial fibrillation, AV Block 1 and Normal ECG with >90%.
Project tutorial by Manivannan
Admit it, you always wanted to play around with a breath controller but couldn't justify the expense. Well, you have no excuse now.
Project tutorial by Costis
The Pulse Express board makes it simple to get the three vital parameters - SpO2, Heartrate and Blood Pressure trending (BPT).
by Team ProtoCentral
This innovative CO2 monitor for schools and offices helps to keep the virus away with an all new, yet very familiar design, a Wall Clock.
Project tutorial by Markusthemaker
Turn all pumping containers into non-contact as well as hand sanitizers using only Arduino and servo motors
Touch-free queue management service powered by Arduino MKR WiFi 1010 and Twilio.
Project tutorial by Nekhil
This accessory can be attached to most hand sanitizer/soap dispensers to make them Completely Automatic and Hands-Free!
An easy and convenient way to measure distance thresholds in public and crowded areas to follow safe social distancing.
Project tutorial by Team Deodates
Build a sterilizer using a UV-C lamp and a 3D printed enclosure!
Project tutorial by Neeraj Rane
The Protector is a safety and automation system that can be used in shops, airports and other public places to enable a touchless interface.
Project tutorial by Ajay Vishaal
UV sterilization lamp based contactless Helmet sterilization box is presented in this project.
Project tutorial by Team RoboticsBangladesh
UV sterilization lamp based Helmet sterilization box is presented in this project.
Project tutorial by RoboticsBangladesh
GERIATRINO is a device designed to be an economic and efficient monitoring and alert system for vulnerable people living alone.
Project tutorial by ramialcala
Shoes cleaning system with an electronic mat that keeps the healthy distance, cleaning time and shoes pair count for maintenance.
Project in progress by quijanov and isaacpachecogo
A device that mounts on top of a traditional keypad and transforms it into a touch-free and bluetooth controllable one.
Project tutorial by Francesco Gritti
A touch-free germs disinfecting device that can disinfect anything from masks, wallets to mobile phones, killing maximum germs using UV-C.
Project tutorial by Yeshvanth Muniraj
One-Way Willie helps enforce one-way aisles in retail stores, limiting customer-to-customer interaction and reducing virus transmission!
Project tutorial by Ish Ot Jr.
An automatic temperature scanning gate is presented to verify the body temperature of any intruder.
Introducing a smart mask built-on Arduino, that has the potential to disrupt lives in better manner.
Project tutorial by Night R
Playing chess with casual opponents, enjoying the game and playing safe, keeping the social distance in the post-Covid era
Project tutorial by Enrico Miglino
It is possible that ultraviolet rays emitted by the sun deactivate the virus in a few seconds. The Beach UV meter measures UV and tweets.
Project tutorial by Mario Soranno
Or connect with your social account:
New here? Create an account