Working on yourself requires constant feedback. I built a setup which measures the dynamics of the bat and gives you feedback on your swing.

An innovative wearable technology for visually impaired peoples.

A cap used to detect and notify you if someone from behind comes closer to you in offices, grocery shops, public transport places, etc.

Collect data such as step count, lost calories, temperature, etc.

A touch-free germs disinfecting device that can disinfect anything from masks, wallets to mobile phones, killing maximum germs using UV-C.

Help the hearing and speech impaired children learn and communicate normally by means of sign-language.

This little AI device will make sure that you make all required movements per day for rotator cuff injury recovery.

How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.

A small COVID medical kit that measures SPO2, Heart Rate and ECG. ECG readings are analyzed and shared via Matlab on to ThingSpeak.

Admit it, you always wanted to play around with a breath controller but couldn't justify the expense. Well, you have no excuse now.

The smart insole collects foot pressure data in real-time. Through Thinger.io the information is fed into a system that visualizes the data.

An easily constructed USB-powered pulse oximeter device that can be built for around $25 and features an OLED display.

This is a anti face touch alarm cap that doesnt allows to touch your face.. this is a trainer cap to not to touch our face!!!

A Low-cost Fully Automatic Fare Collection System for India's Public Transport Services

This reminds people to keep a 2-meter distance from you

Emergêncy hospital Ventilator project to combat the COVID-19 Healy Crisis. Together we are stronger and together we will win💪 👉🌈.

This health band can assist old people in their daily lives, leaving the family stress free!

Low cost smart vitals wearable which can help in early detection of COVID-19 in front line workers

A wearable badge that warns users if they encroach another user's safe social distance. Low cost and no infrastructure required to operate.

The Protector is a safety and automation system that can be used in shops, airports and other public places to enable a touchless interface.

Shows you how you can connect ProtoCentral's MAX30100 breakout board to an Arduino for PulseOx and heart rate measurement and visualization.

Build an affordable device that tests how well a face mask can protect from particulates. Record quantitative data (PM 1.0, 2.5 and 10.0).

Android app-controlled, Arduino-based kit that provides simultaneous data about body t°, heart rate, room humidity and t° data.

This accessory can be attached to most hand sanitizer/soap dispensers to make them Completely Automatic and Hands-Free!