Interfacing MAX30102 with Arduino + BPM measure project with OLED + buzzer.
Project tutorial by SurtrTech
How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.
Project tutorial by Giulio Pons
Record your exertions on the Borg scale.
Project tutorial by glennedi
Almost no wiring!
Beep Beep Beeeep, you can collapse now!
This reminds people to keep a 2-meter distance from you
Project tutorial by arcaegecengiz
A touch-free germs disinfecting device that can disinfect anything from masks, wallets to mobile phones, killing maximum germs using UV-C.
Project tutorial by Yeshvanth Muniraj
A small COVID medical kit that measures SPO2, Heart Rate and ECG. ECG readings are analyzed and shared via Matlab on to ThingSpeak.
Project tutorial by Ninety99
Hi, my name is Rohan Barnwal and in this project I have taught you that how you can build a device which help you to maintain social distanc
Project tutorial by Rohan Barnwal
This project is used to measure temperature by Infrared thermometer automatically and inform result by speaker. It also comment your result
Project tutorial by engineer2you
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
Project tutorial by Team HRMS
Make a heart beat sensor with only an infrared emitter and a receiver, Arduino and see the real time plot of your heart beat.
Project tutorial by yashastronomy
This device detects the presence of your hand and automatically release a specific amount of Hand-wash / Sanitizer to your hand.
Project in progress by Rebeldose
Costs around $120 USD (incredibly cheap compared to competitors) and uses easy-to-find components.
Project showcase by Pablerdo
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
The smart tunnel prevents further outspread of COVID-19 / SARS-CoV-2. It can disinfect a person fully in a time span of just 15 seconds.
Project tutorial by Yash Nayak
A wearable device that can conduct ECG on the go and show it on mobile and is available at cheap cost.
Project tutorial by Rushil Saraswat
My 1st Robot.
Project tutorial by Walley Erfan Khan
UV-C / heat, Arduino-controlled, face-mask disinfecting device for Coronavirus (SARS-CoV-2). #COVID19DetectProtect
Project tutorial by Team NeedLab
A wireless headset which allows you to control devices through cerebral waves. It works with two sensors and a Bluetooth shield.
Project showcase by Daniel Rossi
Turn all pumping containers into non-contact as well as hand sanitizers using only Arduino and servo motors
This project is about a alarm turn on while the distance between two people is smaller than 1.5 meter the minimum recommended for population
Project tutorial by ELÉTRICA SIMULAÇÕES
UV sterilization lamp based Helmet sterilization box is presented in this project.
Project tutorial by RoboticsBangladesh
I have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.
Project showcase by Zorzonel Vlad
Or connect with your social account:
New here? Create an account