This project is about a alarm turn on while the distance between two people is smaller than 1.5 meter the minimum recommended for population
Project tutorial by ELÉTRICA SIMULAÇÕES
Interfacing MAX30102 with Arduino + BPM measure project with OLED + buzzer.
Project tutorial by SurtrTech
This device detects the presence of your hand and automatically release a specific amount of Hand-wash / Sanitizer to your hand.
Project in progress by Rebeldose
Costs around $120 USD (incredibly cheap compared to competitors) and uses easy-to-find components.
Project showcase by Pablerdo
UV sterilization lamp based Helmet sterilization box is presented in this project.
Project tutorial by RoboticsBangladesh
I have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.
Project showcase by Zorzonel Vlad
This project is used to measure temperature by Infrared thermometer automatically and inform result by speaker. It also comment your result
Project tutorial by engineer2you
A UV robot design with Autonomous, manual, and Voice Control to fight this covid-19 pandemic intelligently.
Project in progress by Ajay Vishaal
This is a anti face touch alarm cap that doesnt allows to touch your face.. this is a trainer cap to not to touch our face!!!
Project tutorial by Dynamic Innovator
Arduino Uno-based device intended for negative wound pressure therapy for hospitals in the developing parts of the world.
Project in progress by jpaulmrphy
A touch-free germs disinfecting device that can disinfect anything from masks, wallets to mobile phones, killing maximum germs using UV-C.
Project tutorial by Yeshvanth Muniraj
How to Make Blood Oxygen & Body Temperature Measurement with MAX30102 Pulse Oximeter using Arduino
Project tutorial by DKARDU
This reminds people to keep a 2-meter distance from you
Project tutorial by arcaegecengiz
I made an Arduino library allowing simple communication with uECG device using nRF24 module - minimal example takes just a few lines.
Project tutorial by Dmitry Dziuba
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
A wearable device that can conduct ECG on the go and show it on mobile and is available at cheap cost.
Project tutorial by Rushil Saraswat
The smart tunnel prevents further outspread of COVID-19 / SARS-CoV-2. It can disinfect a person fully in a time span of just 15 seconds.
Project tutorial by Yash Nayak
Prevent back pain by detecting bad posture and correct it immediately!
Project tutorial by Gini76
Simple Feature-rich Smart Contactless thermometer using Arduino and MLX90615. Can Take pictures and share scan data as Excel file
Project tutorial by Aswinth Raj Balasubramani
Thermally insulated box that maintains sensitive samples like vaccines and cells at the desired temperature via battery or 12V sources.
Project tutorial by Viola Introini and Dean Kos
How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.
Project tutorial by Giulio Pons
If you want a device that could measure your heart beat and plot its curve trace on an OLED display, then this will be your best guide.
Project tutorial by DIY GUY Chris
TEmperature TRAcker. Today everyone is involved in both appraising or bashing 'tracing apps'. Instead we will track your temperature.
Project tutorial by giovambattista vieri and Paolo Nenzi
Emergêncy hospital Ventilator project to combat the COVID-19 Healy Crisis. Together we are stronger and together we will win💪 👉🌈.
Project tutorial by David Pascoal
Or connect with your social account:
New here? Create an account