This project consists on a mouse controlled with the movement of the head, using a gyroscope and an Arduino Micro.
Project in progress by Gabry295
This device detects the presence of your hand and automatically release a specific amount of Hand-wash / Sanitizer to your hand.
Project in progress by Rebeldose
If you want a device that could measure your heart beat and plot its curve trace on an OLED display, then this will be your best guide.
Project tutorial by DIY GUY Chris
In this project we show how we made a single-lead ECG monitor for heart-rate variability using the MAX30003 and an Arduino Uno.
Project showcase by ProtoCentral
Prevent back pain by detecting bad posture and correct it immediately!
Project tutorial by Gini76
A small COVID medical kit that measures SPO2, Heart Rate and ECG. ECG readings are analyzed and shared via Matlab on to ThingSpeak.
Project tutorial by Ninety99
A simple timer to ensure the duration of hand washing is 20 seconds
Project tutorial by Akshay Joseph
We initially made HealthyPi as HAT add-on board for Raspberry Pi. Now you can run the application on any desktop PC with a USB port.
by Team protocentral
How to make a Push-up Counter using Arduino and Ultrasonic Sensor HC SR04, 4 digital 7 segment display
Project tutorial by herolivechannel
Make a heart beat sensor with only an infrared emitter and a receiver, Arduino and see the real time plot of your heart beat.
Project tutorial by yashastronomy
A smart gadget made with Arduino that makes sure you never miss your medicine or pills.
Project tutorial by ashraf_minhaj
Using Kemet SS-430 to count push up.
Project tutorial by MixPose
Make Automatic hand santinizer using ultrasonic sensor module, arduino uno and rc servo motor
Hi, my name is Rohan Barnwal and in this project I have taught you that how you can build a device which help you to maintain social distanc
Project tutorial by Rohan Barnwal
A low cost easy to re-make UVC Sterilizer for sterilizing medical equipment and stuff.
Project tutorial by Arnov Sharma
Experimental studies would assert the possibility that PM10 may act as a “carrier” for the spreading of the viral infection of COVID-19.
Project tutorial by Mario Soranno
Touchless hand wash timer that shows a countdown clock & also plays a rotating selection of 20-second jingles. Add your own jingle easily!
Project tutorial by Sridhar Rajagopal
Admit it, you always wanted to play around with a breath controller but couldn't justify the expense. Well, you have no excuse now.
Project tutorial by Costis
An I2C interface with Blynk.
Project showcase by Vlad_the_destroyer
USING HEARTBEAT SENSOR FOR COUNTING THE NUMBER OF HEARTBEATS per MINUTE
Project tutorial by SURYATEJA
The FIRST stop smoking device! !
Project tutorial by Marc Uberstein
Watchzi measure the distance between it and the approaching persons, gives warning with light and sound when 1.5 meters is exceeded.
Project tutorial by draakje156
A dress with my painting of flowers on the fabric; fireflies in the flowers blink according to wearer's heart-rate.
Project tutorial by Kitty Yeung
Really? A pitch? What is this?
Project showcase by Aditya Arun Kumar
Or connect with your social account:
New here? Create an account