A small COVID medical kit that measures SPO2, Heart Rate and ECG. ECG readings are analyzed and shared via Matlab on to ThingSpeak.
Project tutorial by Ninety99
Admit it, you always wanted to play around with a breath controller but couldn't justify the expense. Well, you have no excuse now.
Project tutorial by Costis
Turn all pumping containers into non-contact as well as hand sanitizers using only Arduino and servo motors
It is possible that ultraviolet rays emitted by the sun deactivate the virus in a few seconds. The Beach UV meter measures UV and tweets.
Project tutorial by Mario Soranno
My 1st Robot.
Project tutorial by Walley Erfan Khan
A Remote Patient Monitoring System that gives health workers remote access to patient's vitals without physical contact with patients.
Project tutorial by Le'Knox Ayenie
A low cost easy to re-make UVC Sterilizer for sterilizing medical equipment and stuff.
Project tutorial by Arnov Sharma
With the pandemic COVID-19, the world started to review its habits. This project presents a touch less hand sanitizer to support us!
Project tutorial by Gustavo Bertoli and gabriel123br
Watchzi measure the distance between it and the approaching persons, gives warning with light and sound when 1.5 meters is exceeded.
Project tutorial by draakje156
This device detects the presence of your hand and automatically release a specific amount of Hand-wash / Sanitizer to your hand.
Project in progress by Rebeldose
Touchless hand wash timer that shows a countdown clock & also plays a rotating selection of 20-second jingles. Add your own jingle easily!
Project tutorial by Sridhar Rajagopal
Experimental studies would assert the possibility that PM10 may act as a “carrier” for the spreading of the viral infection of COVID-19.
AutoSteri is a small and compact automatic UV sterilization system that uses a PIR to detect a human and cleans when they leave.
Project tutorial by David Bershadsky
Hand Wash Reminder is a Hand Band which reminds you to wash your hands after every 20 minutes.
Project tutorial by Mukesh Sankhla
Beep Beep Beeeep, you can collapse now!
Project tutorial by glennedi
Make Automatic hand santinizer using ultrasonic sensor module, arduino uno and rc servo motor
Project tutorial by herolivechannel
How to make a Push-up Counter using Arduino and Ultrasonic Sensor HC SR04, 4 digital 7 segment display
Make a heart beat sensor with only an infrared emitter and a receiver, Arduino and see the real time plot of your heart beat.
Project tutorial by yashastronomy
A simple timer to ensure the duration of hand washing is 20 seconds
Project tutorial by Akshay Joseph
Three seashells as an Arduino based timer to measure the 20 seconds, which is recommended if you want to erase all traces of viruses.
Project tutorial by remnis
This simple arduino project counts every push up you do and displays it on an LCD. It also provides visual and auditory support.
Project showcase by glerumkyle
Hi, my name is Rohan Barnwal and in this project I have taught you that how you can build a device which help you to maintain social distanc
Project tutorial by Rohan Barnwal
In order to achieve more indoor physical exercise while there is a threat of SARS-COV-2 outdoors, I worked on this simple game controller.
Project showcase by Kristof
Almost no wiring!
Or connect with your social account:
New here? Create an account