Shows you how you can connect ProtoCentral's MAX30100 breakout board to an Arduino for PulseOx and heart rate measurement and visualization.
Project tutorial by Team Protocentral
This project displays the heart rate at the unit of beats per minute over the Internet so that it can be monitored from anywhere.
Project tutorial by Team Technopaths
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
Project tutorial by HRMS
UV-C / heat, Arduino-controlled, face-mask disinfecting device for Coronavirus (SARS-CoV-2). #COVID19DetectProtect
Project tutorial by NeedLab
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
I have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.
Project showcase by Zorzonel Vlad
Hook up your Arduino to take a look at your ECG, respiration and heart rate using TI's amazing ADS1292R chip.
Project tutorial by ProtoCentral
A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!
Project tutorial by 3 developers
Android app-controlled, Arduino-based kit that provides simultaneous data about body t°, heart rate, room humidity and t° data.
Project tutorial by Diana Khalipina
Getting some information from human body by using simple sensors and Arduino.
Project tutorial by ElectroPeak
I created an electrocardiogram using TouchDesigner. The image moves according to the value of the sensor connected Arduino.
Project tutorial by HomeMadeGarbage
Add Arduino and a Force Resistor Sensor to your next healthcare simulation project to detect the amount of pressure applied on a site!
Project tutorial by David Escobar
An assistive technology for individuals affected by nervous system disorders like Parkinson's and Alzheimer's.
How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.
Project tutorial by Giulio Pons
Just a normal mouse which will give you true feeling of gun firing in games.
Project tutorial by Teenenggr
Arduino Uno-based device intended for negative wound pressure therapy for hospitals in the developing parts of the world.
Project in progress by jpaulmrphy
Adding real-time feedback to a CPR manikin. Allows for depth, rate, time and chest recoil monitoring.
Project showcase by David Escobar
E-health Prototype System for Cardiac Telemonitoring "Caring your heart anywhere"
Project in progress by Laura Juliana Vargas Escobar
Creating E-health care system that allows easier, better, and faster communications between patients, doctors, and hospitals.
Project showcase by Akatsuki
A wearable device that can conduct ECG and show it on mobile and is available at cheap cost.
Project showcase by rushilsaraswat
A smart glove which converts sign language into Alexa commands. Can also be used for speech.
Project tutorial by Pillai HOC College
It's an eTextile patch for hover, touch, and pressure input, using both resistive and capacitive sensing.
Project showcase by fkeel
This health kit helps to get continuously the data about quality and overall duration of the sleep and to determine the sleeping phases.
This exoskeleton was designed to help a patient suffering from paralysis to rehabilitate faster.
Or connect with your social account:
New here? Create an account