Shows you how you can connect ProtoCentral's MAX30100 breakout board to an Arduino for PulseOx and heart rate measurement and visualization.

This project displays the heart rate at the unit of beats per minute over the Internet so that it can be monitored from anywhere.

UV-C / heat, Arduino-controlled, face-mask disinfecting device for Coronavirus (SARS-CoV-2). #COVID19DetectProtect

Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).

How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.

A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.

Android app-controlled, Arduino-based kit that provides simultaneous data about body t°, heart rate, room humidity and t° data.

I have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.

Hook up your Arduino to take a look at your ECG, respiration and heart rate using TI's amazing ADS1292R chip.

Getting some information from human body by using simple sensors and Arduino.

A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!

A wearable device that can conduct ECG on the go and show it on mobile and is available at cheap cost.

This reminds people to keep a 2-meter distance from you

An assistive technology for individuals affected by nervous system disorders like Parkinson's and Alzheimer's.

Add Arduino and a Force Resistor Sensor to your next healthcare simulation project to detect the amount of pressure applied on a site!

I created an electrocardiogram using TouchDesigner. The image moves according to the value of the sensor connected Arduino.

Just a normal mouse which will give you true feeling of gun firing in games.

This is a anti face touch alarm cap that doesnt allows to touch your face.. this is a trainer cap to not to touch our face!!!

This project is used to measure temperature by Infrared thermometer automatically and inform result by speaker. It also comment your result

Arduino Uno-based device intended for negative wound pressure therapy for hospitals in the developing parts of the world.

Adding real-time feedback to a CPR manikin. Allows for depth, rate, time and chest recoil monitoring.

Creating E-health care system that allows easier, better, and faster communications between patients, doctors, and hospitals.

E-health Prototype System for Cardiac Telemonitoring "Caring your heart anywhere"

This exoskeleton was designed to help a patient suffering from paralysis to rehabilitate faster.